Bedienungsanleitung Pioneer VSX-30 (Seite 78 von 136) (Englisch)

574064

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Using other functions08

4 When

Speaker System

is set to

ZONE 2

use the

MASTER VOLUME

dial to adjust the

volume for the sub zone.

5 When you’re finished, press

MULTI-ZONE

CONTROL

again to return to the main zone

controls.

You can also press MULTI-ZONE ON/OFF on

the front panel to switch off all output to the

sub zone.

MULTI-ZONE remote controls

Set the MULTI-ZONE operation switch to

ZONE 2

to operate the corresponding zone.

The following table shows the possible MULTI-

ZONE remote controls:

Making an audio or a video

recording

You can make an audio or a video recording

from the built-in tuner, or from an audio or

video source connected to the receiver (such

as a CD player or TV).

Keep in mind you can’t make a digital

recording from an analog source or vice-versa,

so make sure the components you are

recording to/from are hooked up in the same

way (see Connecting your equipment on

page 15 for more on connections).

Since the video converter is not available when

making recordings (from the video OUT jacks)

make sure to use the same type of video cable

for connecting your recorder as you used to

connect your video source (the one you want to

record) to this receiver. For example, you must

connect your recorder using Component video

if your source has also been connected using

Component video.

For more information about video connections,

see Connecting an HDD/DVD recorder, BD

recorder and other video sources on page 29.

1 Select the source you want to record.

Use the input function buttons (or INPUT

SELECT).

2 Prepare the source you want to record.

Tune to the radio station, load the CD, video,

DVD etc.

3 Prepare the recorder.

Insert a blank tape, MD, video etc. into the

recording device and set the recording levels.

Note

1 The volume levels of the main and sub zone are independent.

2 • You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control first.

• If you don’t plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main rooms so

that this receiver is in standby.

Button What it does



Switches on/off power in the sub zone.

INPUT

SELECT

Use to select the input function in

the sub zone.

Input

function

buttons

Use to select the input function

directly (this may not work for some

functions) in the sub zone.

MASTER

VOLUME

+/–

Use to set the listening volume in the

sub zone.

a.You can only use this button when Speaker System

is set to ZONE 2.

MUTE

Mutes the sound or restores the

sound if it has been muted (adjusting

the volume also restores the sound).

3 • The receiver’s volume, Audio parameters (the tone controls, for example), and surround effects have no effect on

the recorded signal.

• Some digital sources are copy-protected, and can only be recorded in analog.

• Some video sources are copy-protected. These cannot be recorded.

VSX-31_30_UC.book 78 ページ２０１０年８月２５日　水曜日　午前９時２８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-30 Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info