Bedienungsanleitung Pioneer VSX-30 (Seite 100 von 136) (Englisch)

574064

100

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

The Advanced MCACC menu10

100

Checking MCACC Data

At the procedure of Automatically conducting

optimum sound tuning (Auto MCACC on

page 41, the procedure of Automatic MCACC

(Expert) on page 91 or after fine-adjusting at

Manual MCACC setup on page 94, you can

check your calibrated settings using the GUI

screen. The data can be transferred to a

computer using a USB device to check it on the

computer’s screen as well.

1 Press , then press

HOME

A Graphical User Interface (GUI) screen appears

on your TV. Use

///

and

ENTER

navigate through the screens and select menu

items. Press

RETURN

to confirm and exit the

current menu.

2 Select ‘

MCACC Data Check

’ from the

Home Menu

3 Select the setting you want to check.

•

Speaker Setting

– Used to check the

settings of the speaker systems. See

Speaker Setting

below for more on this.

• Channel Level – Used to check the output

level of the different speakers. See Channel

Level below for more on this.

• Speaker Distance – Used to check the

distance to the different speakers. See

Speaker Distance below for more on this.

• Standing Wave – Used to check the

standing wave control filter settings. See

Standing Wave on page 101 for more on

this.

• Acoustic Cal EQ –

Used to check the

calibration values of the listening

environment’s frequency response. See

Acoustic Cal EQ on page 101

for more on

this.

• Output MCACC data – See Output

MCACC data on page 101 for more on this.

4 Press

RETURN

to go back to the

MCACC

Data Check

menu, repeating steps 2 and 3 to

check other settings.

5 When you’re finished, press

RETURN

You will return to the Home Menu.

Speaker Setting

Use this to display the speaker size and

number of speakers. See Speaker Setting on

page 106 for more on this.

1Select ‘

Speaker Setting

’ from the

MCACC

Data Check

menu.

2 Select the channel you want to check.

Use / to select the channel. The

corresponding channel on the layout diagram

is highlighted.

Channel Level

Use this to display the level of the various

channels. See Channel Level on page 107 for

more on this.

1Select ‘

Channel Level

’ from the

MCACC

Data Check

menu.

2 When ‘

MCACC

’ is highlighted, use

/

to select the MCACC preset you want to

check.

The level of the various channels set at the

selected MCACC preset is displayed. ‘---’ is

displayed for channels that are not connected.

Speaker Distance

Use this to display the distance from the

different channels to the listening position. See

Speaker Distance on page 107 for more on this.

1Select ‘

Speaker Distance

’ from the

MCACC Data Check

menu.

2 When ‘

MCACC

’ is highlighted, use

/

to select the MCACC preset you want to

check.

The distance from the various channels set at

the selected MCACC preset is displayed. ‘---’ is

displayed for channels that are not connected.

RECEIVER

VSX-31_30_UC.book 100 ページ２０１０年８月２５日　水曜日　午前９時２８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-30 Seite 100

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info