Bedienungsanleitung Pioneer VSX-30 (Seite 105 von 136) (Englisch)

574064

105

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

The System Setup and Other Setup menus 11

105

1 Select ‘

Manual SP Setup

’, then press

ENTER

See Making receiver settings from the System

Setup menu above if you’re not already at this

screen.

2 Select the setting you want to adjust.

If you are doing this for the first time, you may

want to adjust these settings in order:

• Speaker System – Specifies how you are

using the B speaker terminals (see below).

• Speaker Setting – Specifies the size and

number of speakers you’ve connected

(page 106).

• Channel Level – Adjusts the overall

balance of your speaker system (page 107).

• Speaker Distance – Specifies the distance

of your speakers from the listening position

(page 107).

• X-Curve – Adjusts the tonal balance of

your speaker system for movie soundtracks

(page 108).

3 Make the adjustments necessary for each

setting, pressing

RETURN

to confirm after

each screen.

Speaker system setting

•Default setting: Normal(SB/FH)

There are several ways you can use the speaker

terminals with this receiver. In addition to a

normal home theater setup where they are

used for the front height speakers or front wide

speakers, they can be used for bi-amping the

front speakers or as an independent speaker

system in another room.

1 Select ‘

Speaker System

’ from the

Manual SP Setup

menu.

See Making receiver settings from the System

Setup menu on page 104 if you’re not already at

this screen.

2 Select the speaker system setting.

• Normal(SB/FH) – Select for normal home

theater use with front height speakers in

your main (speaker system A) setup.

• Normal(SB/FW) – Select for normal home

theater use with front wide speakers in

your main (speaker system A) setup.

• Speaker B – Select to use the B speaker

terminals to listen to stereo playback in

another room (see Switching the speaker

terminals on page 77).

• Front Bi-Amp – Select this setting if you’re

bi-amping your front speakers (see Bi-

amping your speakers on page 22).

• ZONE 2 – Select to use the surround back

terminals for an independent system in

another zone (see Using the MULTI-ZONE

controls on page 77).

3 If you selected

Normal(SB/FH)

Normal(SB/FW)

, or

Speaker B

in Step 2,

select the placement of the surround

speakers.

In a 7.1-channel surround system with

surround speakers placed directly at the sides

of the listening position, the surround sound of

5.1-channel sources is heard from the side.

This function mixes the sound of the surround

speakers with the surround back speakers so

that the surround sound is heard from

diagonally to the rear as it should be.

• ON SIDE – Select when the surround

speakers is positioned right beside you.

• IN REAR – Select when the surround

speaker is positioned obliquely behind you.

4 When ‘

Setting Change?

’ is displayed,

select

Yes

If No is selected, the setting is not changed.

You will return to the Manual SP Setup menu.

Note

1 Depending on the positions of the speakers and the sound source, in some cases it may not be possible to achieve

good results. In this case, set the setting to ON SIDE or IN REAR.

VSX-31_30_UC.book 105 ページ２０１０年８月２５日　水曜日　午前９時２８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-30 Seite 105

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info