Bedienungsanleitung Pioneer VSX-31 (Seite 77 von 136) (Englisch)

574063

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Using other functions 08

Switching the speaker terminals

If you selected Speaker B at Speaker system

setting on page 105, you can switch between

speakers using the SPEAKERS button. If you

selected Normal(SB/FH), Normal(SB/FW),

Front Bi-Amp or ZONE 2, the button will

simply switch your main speaker terminals on

or off. The options below are for the Speaker B

setting only.

•Use

SPEAKERS

on the front panel to

select a speaker terminal setting.

As mentioned above, if you have selected

Normal(SB/FH) or Normal(SB/FW), the

button will simply switch your main speaker

terminals (A) on or off.

Press repeatedly to choose a speaker terminal

option:

• SPA – Sound is output from the A-

speaker terminals (up to 7 channels

(including surround back channels),

depending on the source).

• SPB – Sound is output from the two

speakers connected to the B-speaker

terminals. Multichannel sources will not be

heard.

• SPAB – Sound is output from the A-

speaker terminals (up to 5 channels,

depending on the source), the two

speakers connected to the B-speaker

terminal, and the subwoofer. The sound

from B-speaker terminals will be the same

as the sound from the A-speaker terminals

(multichannel sources will be downmixed

to 2 channels).

• SP (off) – No sound is output from the

speakers.

Using the MULTI-ZONE controls

The following steps use the front panel controls

to adjust the sub zone volume and select

sources. See MULTI-ZONE remote controls on

page 78.

1Press

MULTI-ZONE ON/OFF

on the front

panel.

Each press selects a MULTI-ZONE option:

• ZONE 2 ON – Switches the MULTI-ZONE

feature on

• MULTI ZONE OFF – Switches the MULTI-

ZONE feature off

The MULTI-ZONE indicator lights when the

MULTI-ZONE control has been switched ON.

2Press

MULTI-ZONE CONTROL

on the

front panel.

• When the receiver is on,

make sure that

any operations for the sub zone are done

while ZONE 2 shows in the display. If this is

not showing, the front panel controls affect

the main zone only.

3Use the

INPUT SELECTOR

dial to select

the source for the sub zone.

For example, ZONE 2 CD-R sends the source

connected to the CD-R inputs to the sub room

(ZONE 2).

•If you select TUNER, you can use the tuner

controls to select a preset station (see

Saving station presets on page 52 if you’re

unsure how to do this).

• VSX-30 model only: iPod/USB, INTERNET

RADIO and SIRIUS function cannot be

selected for the MULTI-ZONE feature.

Note

1 • The subwoofer output depends on the settings you made in Manual speaker setup on page 104. However, if SPB

is selected above, no sound is heard from the subwoofer (the LFE channel is not downmixed).

• All speaker systems (except Speaker B connections) are switched off when headphones are connected.

2 If the receiver is in standby, the display is dimmed, and ZONE 2 DVD for example shows in the display.

3 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also

changes the station in the other zone. Please be careful not to change stations when recording a radio broadcast.

VSX-31_30_UC.book 77 ページ２０１０年８月２５日　水曜日　午前９時２８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-31 Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info