Bedienungsanleitung Pioneer VSX-31 (Seite 94 von 136) (Englisch)

574063

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

The Advanced MCACC menu10

You can also choose to view the settings by

selecting individual parameters from the

MCACC Data Check screen:

• Speaker Setting – The size and number of

speakers you’ve connected (see page 106

for more on this)

• Channel Level – The overall balance of

your speaker system (see page 95 or 107

for more on this)

• Speaker Distance – The distance of your

speakers from the listening position (see

page 95 or 107 for more on this)

• Standing Wave – Filter settings to control

lower ‘boomy’ frequencies (see page 96 for

more on this)

• Acoustic Cal EQ – Adjustments to the

frequency balance of your speaker system

based on the acoustic characteristics of

your room (see page 97 for more on this)

• Output MCACC data – MCACC data and

parameters can be transferred from this

receiver to a USB device and the data

imported into other devices using a special

application via a computer (see Output

MCACC data on page 101 for more on this).

Press

RETURN

after you have finished checking

each screen. When you’re finished, select

RETURN

to go back to the

Home Menu

Be sure to disconnect the microphone from

this receiver upon completion of the Auto

MCACC Setup.

Manual MCACC setup

You can use the settings in the Manual

MCACC setup menu to make detailed

adjustments when you’re more familiar with

the system. Before making these settings, you

should have already completed Automatically

conducting optimum sound tuning (Auto

MCACC on page 41.

You only need to make these settings once

(unless you change the placement of your

current speaker system or add new speakers).

CAUTION

• The test tones used in the Manual MCACC

setup are output at high volume.

Important

• Press the MCACC button while the

pertinent setup screens are displayed to

select MCACC presets.

• For some of the settings below, you’ll have

to connect the setup microphone to the

front panel and place it about ear level at

your normal listening position. Press

HOME MENU to display the Home Menu

before you connect the microphone to this

receiver. If the microphone is connected

while the HOME MENU is not being

displayed, the display will change to the

Full Auto MCACC under Advanced

MCACC.

• See Problems when using the Auto MCACC

Setup on page 44 for notes regarding high

background noise levels and other possible

interference.

• If you’re using a subwoofer, switch it on

and turn up the volume to the middle

position.

Note

1 Since the distance measurements have been set according to the sound characteristics of your speakers, there are

cases where (for optimal surround sound) the actual distance may differ from the speaker distance setting.

VSX-31_30_UC.book 94 ページ２０１０年８月２５日　水曜日　午前９時２８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-31 Seite 94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info