Bedienungsanleitung Pioneer VSX-31 (Seite 95 von 136) (Englisch)

574063

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

The Advanced MCACC menu 10

1 Select ‘

Manual MCACC

’ from the

Advanced MCACC

menu.

See Making receiver settings from the Advanced

MCACC menu on page 90 if you’re not already

at this screen.

2 Select the setting you want to adjust.

If you’re doing this for the first time, you might

want to make these settings in order.

• Fine Channel Level – Make fine

adjustments to the overall balance of your

speaker system (see Fine Channel Level

below).

• Fine SP Distance – Make precise delay

settings for your speaker system (see Fine

Speaker Distance below).

• Standing Wave – Control overly resonant

low frequencies in your listening room (see

Standing Wave on page 96).

The last two settings are specifically for

customizing the parameters explained in

Acoustic Calibration EQ Adjust on page 97:

• EQ Adjust – Manually adjust the frequency

balance of your speaker system while

listening to test tones (see Acoustic

Calibration EQ Adjust on page 97).

• EQ Professional – Calibrate your system

based on the direct sound coming from the

speakers and make detailed settings

according to your room’s reverb

characteristics (see Acoustic Calibration

EQ Professional on page 97).

Fine Channel Level

•Default setting: 0.0dB (all channels)

You can achieve better surround sound by

properly adjusting the overall balance of your

speaker system. You can adjust the Channel

Level of each speaker in 0.5 dB increments. The

following setting can help you make detailed

adjustments that you may not achieve using

the Manual speaker setup on page 104.

1 Select ‘

Fine Channel Level

’ from the

Manual MCACC

setup menu.

The volume increases to the 0.0 dB reference

level.

2 Adjust the level of the left channel.

This will be the reference speaker level, so you

may want to keep the level around 0.0 dB so

that you’ll have plenty of room to adjust the

other speaker levels.

• After pressing ENTER, test tones will be

output.

3 Select each channel in turn and adjust the

levels (

+/–12.0 dB

) as necessary.

Use / to adjust the volume of the speaker

you selected to match the reference speaker.

When it sounds like both tones are the same

volume, press  to confirm and continue to

the next channel.

• For comparison purposes, the reference

speaker will change depending on which

speaker you select.

• If you want to go back and adjust a

channel, simply use / to select it.

4 When you’re finished, press

RETURN

You will return to the Manual MCACC setup

menu.

Fine Speaker Distance

•Default setting: 10’00’’ (all speakers)

For proper sound depth and separation with

your system, it is necessary to add a slight bit

of delay to some speakers so that all sounds

will arrive at the listening position at the same

time. You can adjust the distance of each

speaker in half inch increments. The following

setting can help you make detailed

adjustments that you may not achieve using

the Manual speaker setup on page 104.

1 Select ‘

Fine SP Distance

’ from the

Manual MCACC

setup menu.

2 Adjust the distance of the left channel

from the listening position.

VSX-31_30_UC.book 95 ページ２０１０年８月２５日　水曜日　午前９時２８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-31 Seite 95

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info