Bedienungsanleitung Pioneer VSX-517-K (Seite 10 von 63) (Englisch)

574089

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

5 minute guide02

Automatically setting up for

surround sound (MCACC)

VSX-817 model only

The Auto Multi-Channel Acoustic Calibration

(MCACC) setup measures the acoustic

characteristics of your listening area, taking

into account ambient noise, speaker size and

distance, and tests for both channel delay and

channel level. After you have set up the

microphone provided with your system, the

receiver uses the information from a series of

test tones to optimize the speaker settings and

equalization for your particular room.

Important

• The Auto MCACC Setup will overwrite any

existing speaker settings you’ve made.

• Make sure the headphones are unplugged.

Caution

• The test tones used in the Auto MCACC

Setup are output at high volume.

1 Connect the microphone to the MCACC/

AUDIO IN jack on the front panel.

Make sure there are no obstacles between the

speakers and the microphone.

Push down on the

PUSH OPEN

tab to access

the

MCACC/AUDIO IN

jack.

If you have a tripod, use it to place the

microphone so that it’s about ear level at your

normal listening position. Otherwise, place the

microphone at ear level using a table or a chair.

2 If the receiver is off, press



RECEIVER

turn the power on.

3 If you have a subwoofer, turn it on.

4 Press

RECEIVER

on the remote control,

then press the

SETUP

button.

• Press

SETUP

again at any time to exit the

System Setup menu.

5 Select ‘A. MCACC’ from the System Setup

menu then press

ENTER

Make sure ‘SB NORM.’ is selected then

press ENTER.

Try to be as quiet as possible after pressing

ENTER

. The system outputs a series of test

tones to establish the ambient noise level.

If the noise level is too high,

NOISY!

blinks in

the display for five seconds. To exit and check

the noise levels again, press

SETUP

(see the

notes about ambient noise below) or press

ENTER

when you’re prompted to

RETRY?

• Do not adjust the volume during the test

tones. This may result in incorrect speaker

settings.

The system now checks the microphone and

your speaker setup.

SOURCE

MULTI CONTROL

RECEIVER

INPUT SELECT

DVD/LD

TV/SAT

DVR/VCR

FM AM

RECEIVER

TV CTRL

CD-R/TAPE

F. AUDIO

STANDARD

ADV.SURR

STEREO/

F.S.SURR

AUTO SURR

RECEIVER CONTROL

SUBTITLE

AUDIO

REC

TOP MENU

GUIDE

T.EDIT

RETURN

TUNE

ENTER

SETUP

ONE TOUCH

COPY

Note

1 The receiver will automatically exit the current menu after three minutes of inactivity. If you cancel the Auto MCACC Setup at

any time, the receiver automatically exits and no settings will be made.

2• If you are planning on bi-amping your front speakers, or setting up a separate speaker system in another room, read through

Surround back speaker setting

on page 39 and make sure to connect your speakers as necessary before continuing to step 7.

UPDOWN

MASTER

VOLUME

MCACC/

AUDI O IN

VSX517_817.fm 10 ページ２００７年２月２２日　木曜日　午後８時１１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-517-K Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-517-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info