Bedienungsanleitung Pioneer VSX-517-K (Seite 35 von 63) (Englisch)

574089

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Listening to your system

English

Français

Deutsch

Nederlands

Italiano

Español

sing surround back channel

processing

VSX-817 model only

• Default setting: SB ON

You can have the receiver automatically use 6.1

decoding for 6.1 encoded sources (for

example, Dolby Digital EX or DTS-ES), or you

can choose to always use 6.1 decoding (for

example, with 5.1 encoded material). With 5.1

encoded sources, a surround back channel

will be generated, but the material may sound

better in the 5.1 format for which it was origi-

nally encoded (in which case, you can simply

switch surround back processing off).

The table below indicates when you will hear

the surround back channel (

ì=Sound plays

through surround back speaker).

• Press

SB ch PROCESSING

to select a

surround back channel option.

Each press cycles through the following:

• SB ON – 6.1 decoding is always used (for

example, a surround back channel will be

generated for 5.1 encoded material)

• SB AUTO – Automatically switches to 6.1

decoding for 6.1 encoded sources (for

example, Dolby Digital EX or DTS-ES)

• SB OFF – Maximum 5.1 playback

Using Virtual Surround Back

(VSB)

When you’re not using surround back

speaker, selecting this mode allows you to

hear a virtual surround back channel through

your surround speakers. You can choose to

listen to sources with no surround back

channel information, or if the material sounds

better in the format (for example, 5.1) for

which it was originally encoded, you can have

the receiver only apply this effect to 6.1

encoded sources like Dolby Digital EX or DTS-

ES.

Depending on the input signal and the

Listening Mode, the Virtual Surround Back

mode may not be effective.

VSX-817 model only – The table indicates when

you will hear the virtual surround back

channel (

ì=Sound plays through surround

speaker).

• Press

SB ch PROCESSING

VSB MODE

select a virtual surround back channel

option.

Each press cycles through the following:

• VSB ON – Virtual Surround Back is always

used (for example, on 5.1 encoded

material)

• VSB AUTO (VSX-817 model only) – Virtual

Surround Back is automatically applied to

6.1 encoded sources (for example, Dolby

Digital EX or DTS-ES)

• VSB OFF – Virtual Surround Back mode is

switched off

Note

1 You can’t use the surround back channel processing with headphones, the Stereo, Front Stage Surround Advance, Stream

Direct mode, or if the surround speaker is set to NO in Speaker setting on page 43 (VSX-817 model only – however, the surround

back speaker must be set to NO).

2 The Virtual Surround Back mode is not effective when using headphones, Stream Direct, Stereo, Front Stage Surround

Advance mode. It is also unavailable if the surround speaker is set to NO in Speaker setting on page 43.

05_playing_sources.fm 35 ページ２００７年２月２２日　木曜日　午後８時４６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-517-K Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-517-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info