Bedienungsanleitung Pioneer VSX-517-K (Seite 43 von 63) (Englisch)

574089

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

The System Setup menu

English

Français

Deutsch

Nederlands

Italiano

Español

3 Use

/

to select the channel you want

and adjust to your liking.

Use the

/

buttons to select the frequency

and

/

to boost or cut the EQ. When you’re

finished, use the

/

buttons to select the

channel display (for example

R EQ

for the right

channel or

SB EQ

for the surround back

channel) then

/

to proceed to the next

channel.

• The front speakers can’t be adjusted if you

selected

F.ALG ADJ

• The

OVER!

indicator shows in the display if

the frequency adjustment is too drastic

and might distort. If this happens, bring the

level down until

OVER!

disappears from

the display.

Tip

• Changing the frequency curve of one

channel too drastically will affect the

overall balance. If the speaker balance

seems uneven, you can raise or lower

channel levels using test tones with the

‘trim’ band (

TRM

shows in the display).

Use

/

to select

TRM

then use

/

raise or lower the channel level for the

current speaker.

4 When you’re finished, press

RETURN

Press

RETURN

once more to go back to the

Manual MCACC setup menu.

Checking your Acoustic Calibration EQ

settings

After you have completed an automatic or

manual Acoustic Calibration EQ adjustment,

you can check the

ALL CH

F.ALIGN

and

CUSTOM1

settings in the display.

1 Select ‘EQ CHECK’ from the Manual

MCACC setup menu.

2 Use

/

and

ENTER

to select the setting

you want to check.

• It is useful to do this while a source is

playing so you can compare settings.

3 Use

/

to select the channel you

want, using

/

to check the settings.

The MCACC channel EQ indicators in the front

panel display will light accordingly.

4 When you’re finished, press RETURN.

You will return to the Manual MCACC setup

menu.

Manual speaker setup

These settings optimize surround sound

performance (if you’re satisfied with the

settings made in

Using the Quick Setup

(VSX-

517 model only)

on page 9/

Automatically

setting up for surround sound (MCACC)

(VSX-

817 model only)

on page 10, adjustment may

not be necessary). You only need to make

these settings once (unless you change the

placement of your current speaker system or

add new speakers).

1 Select SP SETUP from the System Setup

menu.

2 Use

/

to select the setting you want

to adjust then press

ENTER

•

SP SET

– Specify size / number of

speakers connected (see

Speaker setting

below).

•

X.OVER

– Specify which frequencies will

be sent to the subwoofer (see

Crossover

network

on page 44).

•

CH LEVEL

– Adjust overall balance of your

speaker system (see

Channel level

page 44).

•

SP DISTN.

– Specify the distance of your

speakers from the listening position (see

Speaker Distance on page 45).

3 Press RETURN after making the

adjustments necessary for each setting.

Speaker setting

Use this setting to specify your speaker

configuration (size, number of speakers).

1 Select

SP SET

from the SP SETUP menu.

VSX517_817.fm 43 ページ２００７年２月２２日　木曜日　午後８時１１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-517-K Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-517-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info