Bedienungsanleitung Pioneer VSX-522-K (Seite 36 von 39) (Englisch)

574179

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

Additional information

 The front panel display switches over for no apparent

reason to various different displays.

 This happens because the demo display is in operation. To turn

off the demo display, press any button to go back to the

original display, or set the FL Demo Mode to OFF (see The FL

Demo Mode menu on page 33).

 The receiver doesn’t recognize iPod touch/iPhone.

 Try the following.

1. Simultaneously keep pressing the sleep button and home

button on the iPod touch or iPhone for over 10 seconds to

restart.

2. Turn on the receiver.

3. Connect the iPod touch/iPhone to the receiver.

HDMI

 No picture or sound.

 If the problem still persists when connecting your HDMI

component directly to your monitor, please consult the

component or monitor manual or contact the manufacturer for

support.

 No picture.

 Video signals that are input from the analog video terminal will

not output from the HDMI terminal. Signals that are input from

the HDMI terminal will not output from the analog video

terminal. Be consistent with the type of cable between input

and output.

 Depending in the output settings of the source component, it

may be outputting a video format that can’t be displayed.

Change the output settings of the source, or connect using the

composite video jacks.

 This receiver is HDCP-compatible. Check that the components

you are connecting are also HDCP-compatible. If they are not,

please connect them using the composite video jacks.

 Depending on the connected source component, it’s possible

that it will not work with this receiver (even if it is HDCP-

compatible). In this case, connect using the composite video

jacks between source and receiver.

 If video images do not appear on your TV, try adjusting the

resolution, Deep Color or other setting for your component.

 To output signals in Deep Color, use an HDMI cable (High

Speed HDMI

Cable) to connect this receiver to a component

or TV with the Deep Color feature.

 The OSD screen (Home Menu, etc.) isn’t displayed.

 The OSD will not appear if you have connected using the HDMI

output to your TV. Use composite connections when setting up

the system.

 No sound, or sound suddenly ceases.

 Check that the HDMI setting is set to AMP (page 28).

 If the component is a DVI device, use a separate connection for

the audio.

 HDMI format digital audio transmissions require a longer time

to be recognized. Due to this, interruption in the audio may

occur when switching between audio formats or beginning

playback.

 Turning on/off the device connected to this unit’s HDMI OUT

terminal during playback, or disconnecting/connecting the

HDMI cable during playback, may cause noise or interrupted

audio.

Important information regarding the HDMI

connection

There are cases where you may not be able to route HDMI

signals through this receiver (this depends on the HDMI

equipped component you are connecting-check with the

manufacturer for HDMI compatibility information).

If you aren’t receiving HDMI signals properly through this

receiver (from your component), please try the following

configuration when connecting up.

Configuration

Connect your HDMI-equipped component directly to the

display using an HDMI cable. Then use the most convenient

connection (digital is recommended) for sending audio to the

receiver. See the operating instructions for more on audio

connections. Set the display volume to minimum when using

this configuration.

Note

•

Depending on the component, audio output may be limited

to the number of channels available from the connected

display unit (for example audio output is reduced to 2

channels for a monitor with stereo audio limitations).

•

If you want to switch the input source, you’ll have to switch

functions on both the receiver and your display unit.

•

Since the sound is muted on the display when using the

HDMI connection, you must adjust the volume on the

display every time you switch input sources.

iPod messages

 ‘iPod/USB Error 1 (I/U ERR1)’,

‘iPod/USB Error 3 (I/U ERR3)’

 Switch off the receiver and reconnect the iPod to the receiver. If

this doesn’t seem to work, try resetting your iPod.

 ‘iPod/USB Error 2 (I/U ERR2)’

 Switch off the receiver and reconnect the iPod to the receiver. If

this doesn’t seem to work, try resetting your iPod.

 An iPod not supported by this receiver is connected. Connect

the iPod supported by this receiver (page 22).

 ‘No Track’

 When there are no tracks in the category selected on the iPod.

Select a different category.

USB messages

 ‘iPod/USB Error 1 (I/U ERR1)’

 There is a problem with the signal path from the USB to the

receiver. Switch off the receiver and reconnect the USB to the

receiver.

 ‘iPod/USB Error 3 (I/U ERR3)’

 When there is no response from the USB. Switch off the

receiver and reconnect the USB to the receiver.

 ‘iPod/USB Error 4 (I/U ERR4)’

 The power requirements of the USB device are too high for this

receiver. Switch off the receiver and reconnect the USB to the

receiver.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-522-K Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-522-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info