Bedienungsanleitung Pioneer VSX-523- K (Seite 24 von 38) (Englisch)

574085

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Basic playback

Playing a USB device

It is possible to listen to two-channel audio using the USB

interface on the front of this receiver.

Important

•

Pioneer cannot guarantee compatibility (operation and/or

bus power) with all USB mass storage devices and

assumes no responsibility for any loss of data that may

occur when connected to this receiver.

Note

•

This includes playback of WMA/MP3/MPEG-4 AAC files

(except files with copy-protection or restricted playback).

•

Compatible USB devices include external magnetic hard

drives, portable flash memory (particularly keydrives) and

digital audio players (MP3 players) of format FAT16/32. It is

not possible to connect this receiver to a personal

computer for USB playback.

•

With large amounts of data, it may take longer for the

receiver to read the contents of a USB device.

•

If the file selected cannot be played back, this receiver

automatically skips to the next file playable.

•

When the file currently being played back has no title

assigned to it, the file name is displayed in the OSD instead;

when neither the album name nor the artist name is

present, the row is displayed as a blank space.

•

Note that non-roman characters in the playlist are

displayed as ‘*’.

•

Make sure the receiver is in standby when disconnecting

the USB device.

Switch on the receiver and your TV.

See Connecting a USB device on page 17.

Switch the TV input so that it connects to the receiver.

•

Switch the TV input to the input that connects this

receiver to the TV through the corresponding

composite cable.

Press

iPod/USB

on the remote control to switch the

receiver to the iPod/USB input.

Loading appears in the OSD as this receiver starts

recognizing the USB device connected. After the

recognition, a playback screen appears in the OSD and

playback starts automatically.

Basic playback controls

This receiver’s remote control buttons can be used for basic

playback of files stored on USB devices.

•

Press

iPod/USB

to switch the remote control to the iPod/

USB operation mode.

Important

If a USB Error message lights in the display, try following the

points below:

•

Switch the receiver off, then on again.

•

Reconnect the USB device with the receiver switched off.

•

Select another input source (like BD), then switch back to

iPod/USB.

•

Use a dedicated AC adapter (supplied with the device) for

USB power.

For more information on error messages, see USB messages

on page 35.

If this doesn’t remedy the problem, it is likely your USB device

is incompatible.

Compressed audio compatibility

Note that although most standard bit/sampling rate

combinations for compressed audio are compatible, some

irregularly encoded files may not play back. The list below

shows compatible formats for compressed audio files:

•

MP3 (MPEG-1/2/2.5 Audio Layer 3) – Sampling rates:

32 kHz/44.1 kHz/48 kHz; Bit rates: 32 kbps to 320 kbps

(128 kbps or higher recommended); File extension: .mp3

•

WMA (Windows Media Audio) – Sampling rates: 32 kHz/

44.1 kHz/48 kHz; Bit rates: 48 kbps to 192 kbps (128 kbps or

higher recommended); File extension: .wma; WMA9 Pro

and WMA lossless encoding: No

•

AAC (MPEG-4 Advanced Audio Coding) – Sampling rates:

32 kHz/44.1 kHz/48 kHz; Bit rates: 16 kbps to 320 kbps

(128 kbps or higher recommended); File extension: .m4a;

Apple lossless encoding: No

Other compatibility information

•

VBR (variable bit rate) MP3/WMA/MPEG-4 AAC playback:

Yes (Note that in some cases playback time will not be

displayed correctly.)

•

DRM (Digital Rights Management) protection compatible:

Yes (DRM-protected audio files will not play in this

receiver.)

About MPEG-4 AAC

Advanced Audio Coding (AAC) is at the core of the MPEG-4

AAC standard, which incorporates MPEG-2 AAC, forming the

basis of the MPEG-4 audio compression technology. The file

format and extension used depend on the application used to

encode the AAC file. This receiver plays back AAC files

encoded by iTunes

bearing the extension ‘.m4a’. DRM-

protected files will not play, and files encoded with some

versions of iTunes

may not play.

Apple and iTunes are trademarks of Apple Inc., registered in the

U.S. and other countries.

About WMA

WMA is an acronym for Windows Media Audio and refers to

an audio compression technology developed by Microsoft

Corporation. This receiver plays back WMA files encoded

using Windows Media

Player bearing the extension ‘.wma’.

Note that DRM-protected files will not play, and files encoded

with some versions of Windows Media

Player may not play.

VSX-523_UCSMXCN_En_New.book 24 ページ２０１２年１２月１２日　水曜日　午後３時７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-523- K Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-523- K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info