Additional information
60
4
58
9
9
9
Cannot access Windows Media Player 11 or Windows
Media Player 1
In case of Windows Medi: Y
onto the domain through your PC with W
Windows Vd of logg
log onto the local machine (pa).
In case of Windows Medi: Y
onto the domain through your PC with W
installed. Instead of logging onto the , log onto the local
machine (page 42).
Cannot listen to Internet radio stations.
The firewall settings for components on the network are
currently in operation. Check the firewall settings for
components on the network.
Y
connection settings for components on the network, and
consult with your network se
(page 44 ).
The broadcasts from a
interrupted. There are cases where you can
Internet radio stations eve
Internet radio stations on this receiver (page 43).
The NETWORK function cannot be operated with the
buttons on the remote control.
The remote control is not currently set to the NE
Pr
NET
to set the remote control to the NETWORK mode
(page 48 ).
This unit cannot be selected fr
An Internet connection is ed for both the m
device and this unit.
Connect the mobile digital device by W
router of the same network
connected.
A Spotify Premium account (for a charge) must
on the Spotify application.
When this unit is in standby, it cannot be selected from the
Spotify application.
The sound of the Spotify audio stream i
Check whether this unit is selected on the Spotify application.
Check that contents are pla
If the above does not solve
off then back on.
This unit’
slider in the Spotify applic
On some models, there is
prevent the volume from beingo high accidentally
the volume higher in this case, do so by operating the remote
control. When using an application such as iC
volume can also be increased from the
Playback continues on this unit when the Spotify
application is quit.
The Spotify audio stream continues from th
the Spotify applic
Spotify application.
Troubleshooting of wireless LAN
WLAN ERR shows in the display.
There might be an irregularity with the WLAN adaptor
connected to the DC OUTPUT for WIRELESS LAN on the rear
panel.
If WL
ON, please pull out the AC
cord is reconnected after 10 seconds, the WLAN ERR will be
canceled.
Network cannot be accessed via wireless LAN.
Wireless LAN converter
converter“Wireless” indicators are not
all lit). Check that the USB cable connecting the wireless LAN
converter to the receiverDC OUTPUT for WIRELESS LAN
terminal is properly connected.
The LAN cable is not firmly connected. Firmly connect the LAN
cable (page 20).
Wireless LAN converter and base unit (wireless LAN router
etc.) are too far apart
Improve the wireless LAN environment by moving the wireless
LAN converter and base unit closer together
There is a microwave oven or other
electromagnetic waves near
-
Use the system in a place away from microwave ovens or
others device g
-
Avoid using devices generating
much as possible when
LAN.
Wireless LAN connections cannot be established between the
wireless LAN con unit (wireless LAN router
etc.).
-
With the wireless LAN converter connected
turn the receiver’s
power outlet, then plug
receiver’s power on.
-
The wireless LAN converter must be set in order to establish
wireless LAN connections. For details,
instructions of the wireless LAN converter.
The wireless L
receiver and the wireless LAN converter
the wireless LAN converter cabe set from the receiver (the
settings screen cannot be displayed).
If Network Modes in the receiver’s Network Settings is set
to STATIC and the IP address has been set manually
address set in the
the receivers Network Settings , set Network Modes to
DHCP. After the s
off
the wireless LAN converter
receiver
If the settings can be displayed
of the receiver and wireless LAN converter as necessar
The IP address settings of the
converter do not match
etc.
Check the IP address
converter (iNetwork Modes).
If the receiver’s Network Modes is DHCP , turn
power off
Check that the IP addresses of the receiver and wireless LAN
converter match the sett
the receiverNetwork Modes is STATIC, set an
matching the
etc.).
For examp
“192.168.1.1”, set th
(*1), the subnet mask to “255
to “192.168.1.1”.
Next, set the wireless LAN converter’s IP address to
“192.168.1.249” (*2).
(*1) Set the “XXX” in
and 248 that is not assigned to other devic
(*2) Set the “249” in
and 249 that is not assigned to other devic
T
The wireless LAN converter can be connected to a computer to
make the advanced wireless LAN settings. F
CD-ROM included for the wireless LAN converter
settings of the wireless LAN router
settings of the wireless LAN converter
Note, however
settings will not necessarily improve the wireless LAN
environment. Be ca
The access point is set to
SSID may not be displayed on the access point list screen.
