Bedienungsanleitung Pioneer VSX-531D (Seite 17 von 41) (Englisch)

699667

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

Basic Setup

Wait for the test tones to finish.

A progress report is displayed on-screen while the

receiver outputs test tones to determine the speakers

present in your setup. Try to be as quiet as possible

while it’s doing this.

•

For correct speaker settings, do not adjust the volume

during the test tones.

Confirm the speaker configuration.

The configuration shown on-screen should reflect the

actual speakers you have.

•

With error messages (such as Too much ambient

noise) select RETRY after checking for ambient

noise (see Other problems when using the Full Auto

MCACC setup below).

If the speaker configuration displayed isn’t correct, use





to select the speaker and





to change the setting. When

you’re finished, go to the next step.

If you see an error message (ERR) in the right side column,

there may be a problem with the speaker connection. If

selecting RETRY doesn’t fix the problem, turn off the power

and check the speaker connections.

Make sure “OK” is selected, then press

ENTER

If the screen in step 10 is left untouched for 10 seconds

and

ENTER

is not pressed in step 11, the Full Auto

MCACC setup will start automatically as shown.

A progress report is displayed on-screen while the

receiver outputs more test tones to determine the

optimum receiver settings for channel level, speaker

distance and Acoustic Calibration EQ.

Again, try to be as quiet as possible while this is

happening. It may take 1 to 3 minutes.

The Full Auto MCACC setup has finished, then the Home

Menu screen is automatically displayed.

The settings made in the Full Auto MCACC setup should

give you excellent surround sound from your system, but

it is also possible to adjust these settings manually using

the Home Menu (starting on page 30

Note

•

Depending on the characteristics of your room, sometimes

identical speakers with cone sizes of around 12 cm (5

inches) will end up with different size settings. You can

correct the setting manually using the Speaker Setting

page 30.

•

The subwoofer distance setting may be farther than the

actual distance from the listening position. This setting

should be accurate (taking delay and room characteristics

into account) and generally does not need to be changed.

Other problems when using the Full Auto

MCACC setup

If the room environment is not optimal for the Full Auto

MCACC setup (too much background noise, echo off the

walls, obstacles blocking the speakers from the microphone)

the final settings may be incorrect. Check for household

appliances (air conditioner, fridge, fan, etc.), that may be

affecting the environment and switch them off if necessary. If

there are any instructions showing in the front panel display,

please follow them.

•

Some older TVs may interfere with the operation of the

microphone. If this seems to be happening, switch off the

TV when doing the Full Auto MCACC setup.

1.Full Auto MCACC

Now Analyzing

Environment Check

Ambient Noise

Speaker YES/NO

Return

1.Full Auto MCACC

Check

Return

9:NEXT

Front

Center

Surround

Subwoofer

[ YES ]

1.Full Auto MCACC

Now Analyzing

Surround Analyzing

Speaker System

X.Over

Speaker Distance

Channel Level

Acoustic Cal EQ

Return

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-531D Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-531D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info