Bedienungsanleitung Pioneer VSX-531D (Seite 33 von 41) (Englisch)

699667

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

Home Menu

The HDMI Setup menu

If your TV supports an audio return channel (ARC) function,

connect your TV and this unit with an HDMI cable and the TV

audio will be inputted into this unit via the HDMI terminal

without the need for an audio cable to be connected.

It is possible to transfer signals from an HDMI connected

player to the TV even when this receiver’s power is on

standby.

Important

•

Use a High Speed HDMI

®/

™ Cable when using the ARC

function. The ARC function may not operate properly with

other HDMI cables.

Select ‘HDMI Setup’ from the Home Menu.

Choose the ‘ARC’ setting you want.

When a TV supporting the HDMI Audio Return Channel

function is connected to the receiver, the sound of the

TV can be input via the HDMI terminal.

•

ON – The TV’s sound is input via the HDMI terminal.

•

OFF – The TV’s sound is input from the audio input

terminals other than HDMI inputs.

Choose the ‘Standby Through’ setting you want.

When the receiver is in standby, the HDMI input signal

selected here will be output to the TV by HDMI.

•

LAST – The HDMI input signal selected previously

will be output.

•

BD/DVD, CBL/SAT, STRM BOX, GAME – The HDMI

input signal selected here will be output.

•

OFF – Signal will not be output during standby.

If the Standby Through setting is not set to OFF,

the power consumption during standby will

increase.

Choose the ‘4k60p Setting’ setting you want.

If the TV to be connected using HDMI supports 4K/60p,

you can switch the 4k60p setting in accordance with TV

performance.

1. Select an input terminal that you wish to change

settings using





2. Use





to select ‘4k60p’.

3. Use





to select the signal to set.

•

4:4:4 – Select this setting when connecting to a 4K/

60p 4:4:4 24 bit compatible TV using HDMI. More high

quality video images can be enjoyed.

When the HDMI cable does not support 4K/60p

4:4:4 24 bit (18 Gbps transmission), video image

may not be output properly.

In that case, select 4:2:0 to watch a 4K/60p 4:2:0 24

bit video image.

•

4:2:0 – Select this setting when connecting to a 4K/

60p 4:2:0 24 bit compatible TV using HDMI.

4. Press

RETURN

If certain source devices that do not support 4K/60p

4:4:4 24 bit are used and the HDMI terminal is set to

4:4:4, video output from the source device may turn red,

no audio may be output by the source device, or a 3D

signal may not be output by some of the devices. In

these cases, set the HDMI terminal to 4:2:0.

When you’re finished, press

RETURN

You return to the Home Menu.

Before starting ARC operation

When starting ARC operation, put the TV and this unit in

STANDBY mode after connecting this unit with the TV. Next,

turn ON the power of this unit and then the TV, in this order.

In order to start ARC operation, after connecting this unit to

a TV with an HDMI cable, you will need to switch the input on

the TV to the input mode required to connect to this unit.

Then, you can select a TV program.

Important

•

The ARC function may not operate even if the above

conditions are met. If this is the case, listen to the TV audio

after connecting this unit and the TV with an audio cable.

•

The CEC (Consumer Electronic Control) function may

activate when the ARC function is turned ON, causing

power to turn ON and OFF and the input to switch from

one to another. Since this unit does not guarantee

synchronized operation based on the CEC function, we

recommend that you turn OFF the HDMI CONTROL

setting on the connected player. This unit may not operate

properly if the HDMI CONTROL on the player is ON. Refer

to the relevant device’s instruction manual for details. If

this does not work, turn OFF the ARC function.

If this is the case, listen to the TV audio after connecting

this unit and the TV with an audio cable.

In addition, this unit does not guarantee synchronized

operation that allows the TV remote control to operate the

volume (including mute). Use this unit to operate the

volume (including mute).

•

Turn OFF the power and remove the power cord from the

wall socket when connecting other devices or making

connection changes to this unit. After all connections are

completed, insert the power cord into the wall socket.

•

If the power cord is connected when the ARC function is

ON, the HDMI will take 2 to 10 seconds to initialize. This

unit cannot be operated during the initialization. During

initialization, the HDMI indicator on the display will blink.

Turn ON the unit after blinking stops.

Home Menu

1.Full Auto MCACC

2.Manual SP Setup

3.Input Assign

4.Auto Power Down

5.HDMI Setup

6.DAB Setup

Return

5.HDMI Setup

Return

a.ARC

b.Standby Through

c.4k60p Setting

OFF

[

OFF

]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-531D Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-531D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info