Bedienungsanleitung Pioneer VSX-815-K (Seite 12 von 76) (Englisch)

574180

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Quick surround sound setup03

Chapter 3:

Quick surround sound setup

Automatically setting up for

surround sound (MCACC)

The Auto Multi-Channel Acoustic Calibration

(MCACC) setup measures the acoustic

characteristics of your listening area, taking

into account ambient noise, speaker size and

distance, and tests for both channel delay and

channel level. After you have set up the

microphone provided with your system, the

receiver uses the information from a series of

test tones to optimize the speaker settings

and equalization for your particular room.

Important

• The Auto MCACC Setup will overwrite any

existing speaker settings you’ve made.

• Make sure the headphones are unplugged.

Caution

• The test tones used in the Auto MCACC

Setup are output at high volume.

1 Connect the microphone to the MCACC

SETUP MIC

jack on the front panel.

Make sure there are no obstacles between the

speakers and the microphone.

If you have a tripod, use it to place the

microphone so that it’s about ear level at your

normal listening position. Otherwise, place the

microphone at ear level using a table or a chair.

2 If the receiver is off, press



RECEIVER

turn the power on.

If you have a subwoofer, turn it on.

4 Press

RECEIVER

on the remote control,

then press the

SYSTEM SETUP

button.

• Press

SYSTEM SETUP

again at any time to

exit the System Setup menu.

5 Select ‘A. MCACC’ from the System Setup

menu then press

ENTER

6 Make sure ‘SB NORM.’ is selected then

press ENTER.

Try to be as quiet as possible after pressing

ENTER

. The system outputs a series of test

tones to establish the ambient noise level.

Note

1 If you are planning on bi-amping your front speakers, or setting up a separate speaker system in another room, read through

Surround back speaker setting

on page 43 and make sure to connect your speakers as necessary before continuing.

RECEIVER

MULTI CONTROL

SOURCE

INPUT

SELECT

DVD/LD TV/SAT DVR/VCR TV CONT

CD-R/TAPE

TUNER RECEIVER

FL DIMMER SR

DISC

ENTER

TV CONTROL

VOL

ST ST

INPUT

SELECT

TV CH

TV VOL

ENTER

D.ACCESS

TOP MENU

DTV MENU

CLASS

BAND

RETURN

GUIDE

T.EDIT

SYSTEM

SETUP

TUNE

2 The receiver will automatically exit the current menu after three minutes of inactivity. If you cancel the Auto MCACC Setup at

any time, the receiver automatically exits and no settings will be made.

3 If you are planning on bi-amping your front speakers, or setting up a separate speaker system in another room, read through

Surround back speaker setting

and make sure to connect your speakers as necessary before continuing.

DIGITAL IN

SETUP MIC

MCACC

UPDOWN

MASTER

VOLUME

TUNER

AUX

VSX_815-915.book.fm 12 ページ２００４年１２月８日　水曜日　午後４時３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-815-K Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info