Bedienungsanleitung Pioneer VSX-815-K (Seite 56 von 76) (Englisch)

574180

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Controlling the rest of your system10

5 Use

/

(cursor up/down) to select the

manufacturer’s name from the list then press

ENTER.

6 Use

/

(cursor up/down) to select the

proper code from the list, then try using this

remote control with your component.

The code should start with the component type

(for example,

DVD 009

). If there is more than

one, start with the first one.

To try out the remote control, switch the

component on or off (into standby) by pressing

SOURCE



. If it doesn’t seem to work, select

the next code from the list (if there is one).

•

VSX-915 only

– If you can’t find or properly

enter a preset code, you can still teach the

remote individual commands from another

remote control (see

Programming signals

from other remote controls

below).

7 If your component is controlled

successfully, press ENTER to confirm.

The remote LCD display shows

Programming signals from other

remote controls

VSX-915 model only

If the preset code for your component is not

available, or the available preset codes do not

operate correctly, you can program signals

from the remote control of another

component. This can also be used to program

additional operations (buttons not covered in

the presets) after assigning a preset code.

1 While pressing the RECEIVER button,

press and hold the 1 button.

The remote LCD display shows

SETUP

2 Press the MULTI CONTROL button for the

component you want to control.

The LCD on the remote displays the

component you want to control.

3 Use

/

(cursor left/right) to select

LEARN

then press

ENTER

PRES KEY

shows in the LCD display.

• To exit or cancel press

RECEIVER

4 Point the two remote controls towards

each other then press the button that will be

doing the learning on this receiver’s remote

control.

PRES KEY

starts flashing to indicate the

remote is ready to accept a signal.

• The remote controls should be 1–2 inches

apart.

5 Press the corresponding button on the

other remote control that is sending

(teaching) the signal to this receiver’s remote

control.

For example, if you want to learn the playback

control signal, press and hold



for a couple of

seconds. The LCD display will show

if the

operation has been learned.

If for some reasons the operation hasn’t been

learned the LCD will display

ERROR

briefly and

then display

PRES KEY

again. If this happens,

keep pressing the (teaching) button as you vary

the distance between the two remotes, until

the LCD display shows

Note

1• You can’t assign the

RECEIVER

button.

• TV CONTROL

buttons (



TV VOL +/–

TV CH +/–

and

INPUT SELECT

) can only be learned after selecting

TV CONT

2• Some commands from other remote controls cannot be learned, but in most cases the remotes just need to be moved closer

together or farther apart.

• If the remote LCD shows

ERROR

, it may also mean the memory is full. See

Erasing one of the remote control button settings

below to erase a programmed button you’re not using to free up more memory.

1 – 2 inches

INPUT ATT FL DIMMER SR

DISC

RECEIVER

MULTI CONTROL

SOURCE

INPUT

SELECT

SETUP

ENTER

TV CONTROL

RECEIVER CONTROL

SHIFT

VOL

DVD/LD TV/SAT DVR/VCRTV CONT

TUNE

ST ST

STANDRAD

LEVEL EFFECT

TEST TONE

CH SELECT

ADV. SURR STEREO SLEEP

INPUT

SELECT

TV CH

DTV ON/OFF

TUNER

DISPLAY

MPX

AUDIO

CH RETURN

SUBTITLE

MIDNIGHT/

LOUDNESS

DTV INFOREC MU TE

TV VOL

CD-R/TAPE

TUNER RECEIVER

ENTER

REC STOP

HDD

DVD

D.ACCESS

TOP MENU

DTV MENU

CLASS

BAND

RETURN

GUIDE

T.EDIT

MCACC

SETUP

RECEIVER

VSX_815-915.book.fm 56 ページ２００４年１２月８日　水曜日　午後４時３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-815-K Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info