Bedienungsanleitung Pioneer VSX-816-K (Seite 59 von 68) (Englisch)

574181

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Other Settings

English

Français

Deutsch

Nederlands

Italiano

Español

2 Select the number of the component

video input to which you’ve connected your

video component.

The numbers correspond with the numbers

beside the inputs on the back of the receiver.

3 Select the component that corresponds

with the one you connected to that input.

Select between

DVD

DVR

OFF

• Use

/

and

ENTER

to do this.

• Make sure you have connected the audio

from the component to the corresponding

inputs on the rear of the receiver.

• If you connect any source component to

the receiver using a component video

input, you should also have your TV

connected to this receiver's component

video

MONITOR

output.

4 When you're finished, press RETURN.

You return to the Input Assign menu.

The Other Setup menu

The Other Setup menu is where you can make

customized settings to reflect how you are

using the receiver.

1 Press

RECEIVER

on the remote control,

then press the

SETUP

button.

An on-screen display (OSD) appears on your

TV. Use

///

and

ENTER

on the remote

control to navigate through the screens and

select menu items. Press

RETURN

to confirm

and exit the current menu.

2 Select ‘Other Setup’ then press

ENTER

3 Select the setting you want to adjust.

If you are doing this for the first time, you may

want to adjust these settings in order:

•

DRC Setup

– Specify the amount of

dynamic range adjustment to Dolby Digital

soundtracks (see

Dynamic Range Control

Setup

below).

•

Dual Mono Setup

– Isolate one channel

when listening to discs with dual mono

encoding (see

Dual Mono Setup

below).

•

LFE ATT Setup

– Choose the attenuator

level for the LFE channel (

LFE Attenuator

Setup

on page 60).

•

SR+ Setup

– Specify how you want to

control your Pioneer plasma display (

SR+

Setup for Pioneer plasma displays

page 60).

4 Make the adjustments necessary for each

setting, pressing RETURN to confirm after

each screen.

Dynamic Range Control Setup

• Default setting:

OFF

This setting specifies the amount of dynamic

range adjustment to Dolby Digital and DTS

movie soundtracks. You may want to use this

when listening to surround sound at low

volumes.

1 Select ‘DRC Setup’ from the Other Setup

menu.

2 Choose the setting that you want.

•

MAX

– Dynamic range is reduced (loud

sounds are reduced in volume while

quieter sounds are increased).

•

MID

– Mid setting.

•

OFF

– No dynamic range adjustment (use

when listening at higher volume).

3 When you're finished, press

RETURN

You return to the Other Setup menu.

System Setup

1.Surr Back System

2.Auto MCACC

3.Manual MCACC

4.Manual SP Setup

5.Input Assign

6.Other Setup

 : Exit

6.Other Setup

:Return

a.DRC Setup

b.Dual Mono Setup

c.LFE ATT Setup

d.SR

Setup

6.Other Setup

:Return

a.DRC Setup

b.Dual Mono Setup

c.LFE ATT Setup

d.SR

Setup

DRC OFF

6a.Dynamic Range Control

:Finish

VSX_816.book.fm 59 ページ２００５年１２月８日　木曜日　午後６時５４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-816-K Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info