Bedienungsanleitung Pioneer VSX-818V (Seite 50 von 76) (Englisch)

794003

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Controlling the rest of your system09

Selecting preset codes directly

1 While pressing the

RECEIVER

button,

press and hold the ‘

’ button.

The LED blinks.

2Press the

MULTI CONTROL

button for the

component you want to control.

The LED lights on continuously.

3 Use the number buttons to enter the

preset code.

You can find the preset codes on page 54.

The LED blinks again after you enter the code.

If the correct code has been input the power of

the component being input will turn on or off.

The power of the component being input will

only turn on or off if that component is able to

be turned on directly by remote control.

•You can only input a code for the component

type written on each

MULTI CONTROL

button.

•Even if you don’t input a preset code for the

TV (

MULTI CONTROL

button) you will

be able to control your TV using the

dedicated

TV CONTROL

on the remote if

you have assigned it to the

TV CTRL

button.

4Repeat steps 2 through 3 to try a different

code, or to enter a code for another

component you want to control.

5 When you’re done, press

RECEIVER

Direct function

• Default setting:

You can use the direct function feature to

control one component using the remote

control while at the same time, using your

receiver to playback a different component.

This could let you, for example, use the remote

control to set up and listen to a CD on the

receiver and then use the remote control to

rewind a tape in your VCR while you continue

to listen to your CD player.

When direct function is on, any component

you select (using the

MULTI CONTROL

buttons) will be selected by both the receiver

and the remote control. When you turn direct

function off, you can operate the remote

control without affecting the receiver.

1 While pressing the RECEIVER button,

press and hold the ‘4’ button.

The LED blinks.

2 Press the MULTI CONTROL button for

the component you want to control.

The LED lights on continuously.

3Use the number buttons to enter either

‘1’ (direct on) or ‘2’ (direct off).

The LED blinks again.

4 Repeat steps 2 through 3 for the other

components you want to control.

5 When you’re done, press

RECEIVER

Clearing all the remote control

settings

You can clear all presets and restore the

factory default settings.

• While pressing the

RECEIVER

button,

press and hold the ‘0’ button for three

seconds.

The LED blinks three times indicating the settings

have been restored to the factory presets.

Note

1• TV codes (for example, codes for TV, CATV, Satellite TV or DTV) can only be assigned to the

TV CTRL

button.

• You can’t assign the

RECEIVER

buttons.

TV CONTROL

MPX

DIMMER

iPod CTRL

SLEEP

D.ACCESS

SIGNAL SEL

INPUT

TUNER DISP

CLASS

DISC

SR+

ENTER

INFO

MIDNIGHT

ANALOG ATT

+10

RECEIVER

INPUT SELECT

TV CTRL

SOURCE

TV DVR

SIRIUS

CD-R

PORTABLE

iPodDVD

RECEIVER

MULTI CONTROL

STEREO/

2 You can’t use direct function with the

and

TV CTRL

functions.

VSX_918_818_KU.book 50 ページ２００７年１１月２８日　水曜日　午後６時５８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-818V Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info