Bedienungsanleitung Pioneer VSX-818V (Seite 65 von 76) (Englisch)

794003

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Other Settings 11

English Français

Deutsch

Nederlands

Italiano Español

Assigning the component video inputs

• Default settings:

Component 1

–

DVD

Component 2

–

Component 3

–

DVR

If you used component video cords to connect

your video equipment you must tell the receiver

which device it is, or else you may see the

composite video input instead of the

component video signal. For more on this, see

Using the component video jacks

on page 16.

1 Select ‘Component Input’ from the Input

Assign menu.

2 Select the number of the component

video input to which you’ve connected your

video component.

The numbers correspond with the numbers

beside the inputs on the rear of the receiver.

3 Select the component that corresponds

with the one you connected to that input.

Select between

DVD

DVR

OFF

• Use

/

and

ENTER

to do this.

• If you assign a component input to a

certain function, any component inputs

previously assigned to that function will

automatically be switched off.

• Make sure you have connected the audio

from the component to the corresponding

inputs on the rear of the receiver.

• If you connect any source component to

the receiver using a component video

input, you should also have your TV

connected to this receiver’s component

video

MONITOR

output (down converting

component video is not possible after

assigning an input).

4 When you’re finished, press RETURN.

You return to the Input Assign menu.

Assigning the HDMI inputs

• Default settings:

HDMI - 1

–

DVD

HDMI - 2

–

If you used HDMI to connect your video

equipment, you must tell the receiver which

input terminal(s) you have used, so that you

see the proper video signal when you select

the input source.

1Select ‘HDMI Input’ from the Input Assign

menu.

2 Select the number of the HDMI input to

which you’ve connected your video

component.

The numbers correspond with the numbers

beside the inputs on the rear of the receiver.

3 Select the component that corresponds

with the one you connected to that input.

Select between

DVD

DVR

OFF

• Use

/

and

ENTER

to do this.

•If you assign an HDMI input(s) to a certain

function, any HDMI inputs previously

assigned to that function will automatically

be switched off

•

VSX-818V model only:

To hear audio from

your HDMI component (through this

system), you must also make separate

audio connections to the corresponding

inputs on the rear of the receiver. For more

on this, see

Connecting using HDMI

page 16.

•If you connect any video component to the

receiver using HDMI, you should also have

your TV connected to this receiver’s HDMI

output.

4 When you’re finished, press RETURN.

You return to the Input Assign menu.

4. Input Assign

:Return

a.Digital Input

b.Component Input

c.HDMI Input

4b.Component Input

:Finish

Component–1 DVD

Component–2 [ TV ]

Component–3 [ DVR ]

4. Input Assign

:Return

a.Digital Input

b.Component Input

c.HDMI Input

VSX_918_818_KU.book 65 ページ２００７年１１月２８日　水曜日　午後６時５８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-818V Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info