Bedienungsanleitung Pioneer VSX-823-K (Seite 4 von 20) (Englisch)

574084

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Initial Setup

Before you start

Put the batteries in the remote control.

The batteries included with the unit are to check initial

operations; they may not last over a long period. We

recommend using alkaline batteries that have a longer life.

Switch on the receiver and your TV.

INPUT SELECT

SOURCESLEEP

CONTROL

INPUT

RECEIVER

Switch the TV input so that it connects to the

receiver.

Turn the subwoofer on and turn up the

volume.

CAUTION

• Do not use or store batteries in direct sunlight or other

excessively hot place, such as inside a car or near a

heater. This can cause batteries to leak, overheat, explode

or catch fire. It can also reduce the life or performance of

batteries.

• When inserting the batteries, make sure not to damage

the springs on the battery’s (–) terminals. This can cause

batteries to leak or overheat.

• When disposing of used batteries, please comply with

governmental regulations or environmental public

institution’s rules that apply in your country/area.

Automatically setting up for surround sound (MCACC)

The Auto Multi-Channel ACoustic Calibration (MCACC) setup

uses the supplied setup microphone to measure and analyze

the test tone that is outputted by the speakers. This setup

enables automatic high precision measuring and settings;

utilizing it will create an optimum user listening environment.

Important

• Measure in a quiet environment.

• If you have a tripod, use it to place the microphone so

that it’s about ear level at your normal listening position.

Otherwise, place the microphone at ear level using a table

or a chair.

• Accurate measurements may not be possible if there are

obstacles between the speakers and the listening position

(microphone).

• When measuring, step away from the listening position,

and operate using the remote control from the external

side of all the speakers.

Connect the supplied setup microphone.

MCACC

SETUP

MIC

Press

RECEIVER

on the remote control, then

press the HOME MENU button.

The Home Menu appears on your TV.

Select ’Auto MCACC’ from the Home Menu,

then press ENTER.

Automatic measuring will start.

Home Menu

. Auto MCACC

. Manual SP Setup

. Input Assign

4. Auto Power Down

5. HDMI Setup

6. Network Standby

7. MHL Setup

8. OSD Setup

. Auto MCACC

Now Analyzing

Surround Analyzing

Speaker System

X.Over

Speaker Distance

Channel Level

Acoustic Cal EQ

Return

• Measuring will take about 3 to 12 minutes.

Follow the instructions on-screen.

• Automatic setting is complete when the Home Menu

screen appears.

Make sure the setup microphone is

disconnected.

Tripod

Microphone

VSX-1023/

VSX-823/

VSX-523

VSX-823

VSX-523_CUXESM_QSG_En.indd 4VSX-523_CUXESM_QSG_En.indd 4 2012/12/12 14:55:582012/12/12 14:55:58

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-823-K Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-823-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info