Bedienungsanleitung Pioneer VSX-824 (Seite 58 von 69) (Englisch)

548142

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

Chapter

Using the MULTI-ZONE feature (VSX-1029 only)

MULTI-ZONE listening

This receiver can power up to two independent systems in

separate rooms after you have made the proper MULTI-ZONE

connections.

Different sources can be playing in two zones at the same

time or, depending on your needs, the same source can also

be used. The main and sub zones have independent power

(the main zone power can be off while the sub zone is on) and

the sub zone can be controlled by the remote or front panel

controls.

Making MULTI-ZONE connections

It is possible to make these connections if you have a separate

speakers for your sub zone.

Note

•

You can listen to the built-in tuner and other analog audio

sources in the sub zone.

•

You can’t use sound controls (such as the bass/treble

controls or Midnight listening) or any surround modes with

a separate amplifier in the sub zone. You can, however, use

the features available with your sub zone amplifier.

•

Use this after selecting ZONE 2 for The Speaker System

setting (VSX-1029 only) on page 57 on the Home Menu.



Connect a speaker to the SURROUND BACK/ZONE2

terminal on the rear of this receiver.

For details, see VSX-1029 connection diagram on

page 14

You should have a pair of speakers attached to the sub

zone amplifier as shown.

Using the MULTI-ZONE controls

The following steps use the front panel controls to select

sources. See MULTI-ZONE remote controls

below.

Press

CONTROL MULTI-ZONE ON/OFF

button on the

front panel.

The ZONE indicator lights when the MULTI-ZONE control

has been switched ON.

•

When the receiver is on, make sure that any operations

for the sub zone are done while ZONE lights in the

display. If this is not showing, the front panel controls

affect the main zone only. If the receiver is in standby,

the display is dimmed, and ZONE continues to light in

the display.

Press

CONTROL MULTI-ZONE ON/OFF

button on the

front panel.

Each press will switch between main zone and sub zone

control.

•

If no operation is performed for a few seconds, MULTI-

ZONE CONTROL mode will automatically end.

Press

INPUT SELECTOR

dial to select the source for the

zone you have selected.

For example, Z2: DVD sends the source connected to the

DVD inputs to the sub room (ZONE 2).

•

If you select TUNER, you can use the tuner controls to

select a preset station (see Saving station presets

page 36 if you’re unsure how to do this). The tuner

cannot be tuned to more than one station at a time.

Therefore, changing the station in one zone also

changes the station in the other zone. Please be

careful not to change stations when recording a radio

broadcast.

Use

MASTER VOLUME

dial to adjust the volume for the

sub zone.

When you’re finished, press

CONTROL MULTI-ZONE

ON/OFF

again to return to the main zone controls.

You can also press

CONTROL MULTI-ZONE ON/OFF

button on the front panel to switch off all output to the

sub zone.

Note

•

You won’t be able to switch the main zone off completely

unless you’ve switched off the MULTI-ZONE control first.

•

If you don’t plan to use the MULTI-ZONE feature for a while,

turn off the power in both the sub and main rooms so that

this receiver is in standby.

MULTI-ZONE remote controls

With button pressed, press the buttons below to

operate the corresponding zone.

The following table shows the possible MULTI-ZONE remote

controls:

SPEAKERS BAND

CONTROL

MULTI-ZONE

ON/OFF

Button What it does



STANDBY/

Switches on/off power in the sub zone.

Input function

buttons

Use to select the input source directly in the

sub zone.

VOLUME +/–

Use to set the listening volume in the sub zone.

MUTE

Mutes the sound or restores the sound if it has

been muted (adjusting the volume also

restores the sound).

SHIFT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-824 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-824

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info