Bedienungsanleitung Pioneer VSX-827-K (Seite 37 von 68) (Englisch)

491882

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Listening to your system

Setting the Audio options

There are a number of additional sound settings you can

make using the AUDIO PARAMETER menu. The defaults, if

not stated, are listed in bold.

Important

•

Note that if a setting doesn’t appear in the AUDIO

PARAMETER menu, it is unavailable due to the current

source, settings and status of the receiver.

Press , then press

AUDIO PARAMETER

Use

/

to select the setting you want to adjust.

Depending on the current status/mode of the receiver,

certain options may not be able to be selected. Check the

table below for notes on this.

Use

/

to set it as necessary.

See the table below for the options available for each

setting.

Press

RETURN

to confirm and exit the menu.

SLEEP

INPUT

RECEIVER

SOURCE

RECEIVER

Setting/What it does Option(s)

EQ (Acoustic Calibration EQ)

Switches on/off the effect of Acoustic

Calibration EQ.

OFF

S.DELAY (Sound Delay)

Some monitors have a slight delay when

showing video, so the soundtrack will be

slightly out of sync with the picture. By adding

a bit of delay, you can adjust the sound to

match the presentation of the video.

0.0 to 9.0

(frames)

1 second = 25

frames (PAL)

Default: 0.0

MIDNIGHT/LOUDNESS

The MIDNIGHT allows you to hear effective

surround sound of movies at low volumes.

The LOUDNESS is used to get good bass and

treble from music sources at low volumes.

M/L OFF

MIDNIGHT

LOUDNESS

S.RTV (Sound Retriever)

When audio data is removed during the

compression process, sound quality often

suffers from an uneven sound image. The

Sound Retriever feature employs new DSP

technology that helps bring CD quality sound

back to compressed 2-channel audio by

restoring sound pressure and smoothing

jagged artifacts left over after compression.

OFF

DUAL MONO

Specifies how dual mono encoded Dolby

Digital soundtracks should be played.

CH1 – Channel 1

is heard only

CH2 – Channel 2

is heard only

CH1 CH2 – Both

channels heard

from front

speakers

F.PCM (Fixed PCM)

This is useful if you find there is a slight delay

before OFF recognizes the PCM signal on a

CD, for instance.

When ON is selected, noise may be output

during playback of non-PCM sources. Please

select another input signal if this is a problem.

OFF

DRC (Dynamic Range Control)

Adjusts the level of dynamic range for movie

soundtracks optimized for Dolby Digital, DTS,

Dolby Digital Plus, Dolby TrueHD, DTS-HD

and DTS-HD Master Audio (you may need to

use this feature when listening to surround

sound at low volumes).

AUTO

MAX

MID

OFF

LFE ATT (LFE Attenuate)

Some Dolby Digital and DTS audio sources

include ultra-low bass tones. Set the LFE

attenuator as necessary to prevent the ultra-

low bass tones from distorting the sound from

the speakers.

The LFE is not limited when set to 0 dB, which

is the recommended value. When set to –15

dB, the LFE is limited by the respective

degree. When OFF is selected, no sound is

output from the LFE channel.

0 (0 dB)

5 (–5 dB)

10 (–10 dB)

15 (–15 dB)

20 (–20 dB)

** (OFF)

SACD G. (SACD Gain)

Brings out detail in SACDs by maximizing the

dynamic range (during digital processing).

0 (0 dB)

+6 (+6 dB)

HDMI (HDMI Audio)

Specifies the routing of the HDMI audio signal

out of this receiver (AMP) or through to a TV

(THRU). When THRU is selected, no sound is

output from this receiver.

AMP

THRU

A.DLY (Auto Delay)

This feature automatically corrects the audio-

to-video delay between components

connected with an HDMI cable. The audio

delay time is set depending on the operational

status of the display connected with an HDMI

cable. The video delay time is automatically

adjusted according to the audio delay time.

OFF

C.WIDTH (Center Width)

(Applicable only when using a center speaker)

Spreads the center channel between the front

right and left speakers, making it sound wider

(higher settings) or narrower (lower settings).

0 to 7

Default: 3

Setting/What it does Option(s)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-827-K Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-827-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info