Bedienungsanleitung Pioneer VSX-827-K (Seite 54 von 68) (Englisch)

491882

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Control with HDMI function

Before using synchronization

Once you have finished all connections and settings, you

must:

Put all components into standby mode.

Turn the power on for all components, with the power

for the TV being turned on last.

Choose the HDMI input to which the TV is connected to

this receiver, and see if video output from connected

components displays properly on the screen or not.

Check whether the components connected to all HDMI

inputs are properly displayed.

About synchronized operations

The Control with HDMI-compatible component connected to

the receiver operates in sync as described below.

•

Synchronized amp mode

From the menu screen of the Control with HDMI-

compatible TV, set audio to be played through this

receiver, and the receiver will switch to the synchronized

amp mode.

When in the synchronized amp mode, the synchronized

amp mode is canceled when the receiver’s power is

turned off. To turn the synchronized amp mode back on,

set audio to be played through the receiver from the TV’s

menu screen, etc. This receiver will power up and switch

to the synchronized amp mode.

When in the synchronized amp mode, the synchronized

amp mode is canceled if an operation that produces

sound from the TV is performed from the TV’s menu

screen, etc.

When the synchronized amp mode is canceled, the

receiver’s power turns off if you were viewing an HDMI

input or a TV program on the TV.

•

Power synchronization with TV

When the TV’s power is set to standby, the receiver’s

power is also set to standby. (Only when the input for a

component connected to the receiver by HDMI

connection is selected or when watching the TV.)

•

Automatic switching of inputs

The receiver’s input switches automatically when the

Control with HDMI-compatible component is played.

The receiver’s input switches automatically when the

TV’s input is switched.

The synchronized amp mode remains in effect even if the

receiver’s input is switched to a component other than

one connected by HDMI.

Cautions on the Control with HDMI function

•

Connect the TV and components (Blu-ray Disc player, etc.)

directly to this receiver. Interrupting a direct connection

with other amps or an AV converter (such as an HDMI

switch) can cause operational errors.

•

When the receiver’s Control is turned ON, even if the

receiver’s power is in the standby mode, it is possible to

output the audio and video signals from a player via HDMI

to the TV without producing sound from the receiver, but

only when a Control with HDMI-compatible component

(Blu-ray Disc player, etc.) and compatible TV are

connected. In this case, the receiver’s power turns on and

the power and HDMI indicators light.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-827-K Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-827-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info