Bedienungsanleitung Pioneer VSX-827-K (Seite 63 von 68) (Englisch)

491882

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Additional information

 After using the Auto MCACC setup, the speaker size

setting (LARGE or SMALL) is incorrect.

 Low-frequency noise could have been caused by an air

conditioner or motor. Switch off all appliances in the room and

rerun the Auto MCACC setup.

 Can’t operate the remote control.

 Replace the batteries (page 10).

 Operate within 7 m, 30º of the remote sensor (page 10).

 Remove the obstacle or operate from another position.

 Avoid exposing the remote sensor on the front panel to direct

light.

 The display is dark or off.

 Press

DIMMER

on the remote control repeatedly to return to

the default.

 The front panel display switches over for no apparent

reason to various different displays.

 This happens because the demo display is in operation. To turn

off the demo display, press any button to go back to the

original display, or set the FL Demo Mode to OFF (see The FL

Demo Mode menu on page 52).

 The receiver doesn’t recognize iPod touch/iPhone.

 Try the following.

1. Simultaneously keep pressing the sleep button and home

button on the iPod touch or iPhone for over 10 seconds to

restart.

2. Turn on the receiver.

3. Connect the iPod touch/iPhone to the receiver.

 The

Bluetooth

wireless technology device cannot be

connected or operated. Sound from the

Bluetooth

wireless technology device is not emitted or the sound is

interrupted.

 Check that no object that emits electromagnetic waves in the

2.4 GHz band (microwave oven, wireless LAN device or

Bluetooth wireless technology apparatus) is near the unit. If

such an object is near the unit, set the unit far from it. Or, stop

using the object emitting the electromagnetic waves.

 Check that the Bluetooth wireless technology device is not too

far from the unit and that obstructions are not set between the

Bluetooth wireless technology device and the unit. Set the

Bluetooth wireless technology device and the unit so that the

distance between them is less than about 10 m and no

obstructions exist between them.

 Check that the Bluetooth ADAPTER and the ADAPTER PORT

terminal of the unit are correctly connected.

 The Bluetooth wireless technology device may not be set to the

communication mode supporting the Bluetooth wireless

technology. Check the setting of the Bluetooth wireless

technology device.

 Check that pairing is correct. The pairing setting was deleted

from this unit or the Bluetooth wireless technology device.

Reset the pairing.

 Check that the profile is correct. Use a Bluetooth wireless

technology device that supports A2DP profile and AVRCP

profile.

NETWORK feature

 Cannot access the network.

 The LAN cable is not firmly connected. Firmly connect the LAN

cable (page 20).

 The router is not switched on. Switch on the router.

 Internet security software is currently installed in the

connected component. There are cases where a component

with Internet security software installed cannot be accessed.

 The audio component on the network which has been

switched off is switched on. Switch on the audio component

on the network before switching on this receiver.

 Playback does not start while ‘Connecting Wired...’

continues to be displayed.

 The component is currently disconnected from this receiver or

the power supply. Check whether the component is properly

connected to this receiver or the power supply.

 The PC or Internet radio is not properly operated.

 The corresponding IP address is not properly set. Switch on the

built-in DHCP server function of your router, or set up the

network manually according to your network environment

(page 52).

 The IP address is being automatically configured. The

automatic configuration process takes time. Please wait.

 The audio files stored on components on the network,

such as a PC, cannot be played back.

 Windows Media Player 11 or Windows Media Player 12 is not

currently installed on your PC. Install Windows Media Player 11

or Windows Media Player 12 on your PC.

 Audio files recorded in MPEG-4 AAC or FLAC are being played

back on Windows Media Player 11 or Windows Media Player

12. Audio files recorded in MPEG-4 AAC or FLAC cannot be

played back on Windows Media Player 11 or Windows Media

Player 12. Try using another server. Refer to the operation

manual supplied with your server.

 The component connected to the network is not properly

operated.

Check whether the component is affected by special

circumstances or is in the sleep mode.

Try rebooting the component if necessary.

 The component connected to the network does not permit file

sharing. Try changing the settings for the component

connected to the network.

 The folder stored on the component connected to the network

has been deleted or damaged. Check the folder stored on the

component connected to the network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-827-K Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-827-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info