Bedienungsanleitung Pioneer VSX-828 (Seite 21 von 71) (Englisch)

536837

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

Connecting your equipment

Connecting an IR receiver (VSX-828 only)

If you keep your stereo components in a closed cabinet or

shelving unit, or you wish to use the sub zone remote control

in another zone, you can use an optional IR receiver (such as

a Niles or Xantech unit) to control your system instead of the

remote sensor on the front panel of this receiver.

Note

•

Remote operation may not be possible if direct light from a

strong fluorescent lamp is shining on the IR receiver

remote sensor window.

•

Note that other manufacturers may not use the IR terminology.

Refer to the manual that came with your component to check for

IR compatibility.



Connect the IR receiver sensor to the IR IN jack on the

rear of this receiver.

For more information on connecting the IR receiver, see the

Installation Instructions for the IR Receiver.

Connecting an iPod

This receiver has a dedicated iPod/iPhone/iPad terminals that

will allow you to control playback of audio content from your

iPod using the controls of this receiver.

Note

•

An iPod/iPhone/iPad can be connected to the receiver. For

details on supported models and versions of the respective

products, see Playing an iPod

on page 29.



Switch the receiver into standby, and then use the iPod

cable to connect your iPod to the iPod/iPhone/iPad

terminals on the front panel of this receiver.

•

For the cable connection, also refer to the operating

instructions for your iPod.

•

When connecting an iPhone to this unit, keep the iPhone

at least 20 cm away from this unit. If the iPhone is kept

closer to this unit and a telephone call is received by the

iPhone, noise may be output from this device.

•

iPod recharging occurs whenever an iPod is connected to

this unit. (Recharging is enabled only when the unit’s

power is turned on.)

•

For instructions on playing the iPod, see Playing an iPod on

page 29.

Use a dedicated cable to enjoy iPod video

If an iPod is connected using a dedicated iPod connection

cable (sold separately), then video from the iPod can also be

enjoyed on a TV that is connected to the receiver.

•

The iPod cable is not included with this receiver. The

optional iPod cable from Pioneer is sold separately under

the part number L308102013030-IL. Contact the Pioneer

Customer Support division for more information on

obtaining an optional iPod cable.

•

iPhone 5, iPad 4th generation, iPad mini, iPod touch 5th

generation and iPod nano 7th generation cannot be

connected using a separately sold iPod cable.

Other component

Closet or shelving unit

IR receiver

iPod/iPhone/iPad

USB cable that

comes with the iPod

iPod/iPhone/iPad

iPod cable

VSX-828_SYXE8_En.book 21 ページ２０１３年３月１日　金曜日　午前９時１６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-828 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-828

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info