Bedienungsanleitung Pioneer VSX-9120TXH-k (Seite 9 von 88) (Englisch)

574198

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

5 minute guide

1 Switch on the receiver and your TV.

2 Connect the microphone to the MCACC

SETUP MIC

jack on the front panel.

Place the microphone so that it’s about ear level at your

normal listening position (use a tripod if possible). Make

sure there are no obstacles between the speakers and

the microphone.

The Auto MCACC display appears once the microphone

is connected.

3 Make sure ‘Normal (SB)’ is selected,

select an

MCACC preset

then select OK.

4 Follow the instructions on-screen.

Make sure the microphone is connected, and if you’re

using a subwoofer, make sure it is switched on and set to

a comfortable volume level.

5 Wait for the test tones to finish then confirm the

speaker configuration in the OSD.

A progress report is displayed on-screen while the

receiver outputs test tones to determine the speakers

present in your setup. Try to be as quiet as possible while

it’s doing this.

If no operations are performed for 10 seconds while the

speaker configuration check screen is being displayed,

the Auto MCACC Setup will resume automatically. In this

case, you don’t need to select ‘

’ and press

ENTER

step 6.

• With error messages (such as

Ambient Noise

Microphone Check

) select

RETRY

after checking for

ambient noise (see

Problems when using the Auto

MCACC Setup

below) and verifying the mic

connection. If there doesn’t seem to be a problem,

you can simply select

GO NEXT

and continue.

The configuration shown on-screen should reflect the

actual speakers you have.

If you see an error message (

ERR

) in the right side

column (or the speaker configuration displayed isn’t

correct), there may be a problem with the speaker

connection. If selecting

RETRY

doesn’t work, turn off the

power and check the speaker connections. If there

doesn’t seem to be a problem, you can simply use

/

to select the speaker and

/

to change the setting

(and number for surround back) and continue.

6 Make sure ‘OK’ is selected, then press

ENTER

A progress report is displayed on-screen while the

receiver outputs more test tones to determine the

optimum receiver settings for channel level, speaker

distance, and Acoustic Calibration EQ.

Again, try to be as quiet as possible while this is

happening. It may take 2 to 6 minutes.

7 The Auto MCACC Setup has finished! Press

RETURN

to go back to the System Setup menu.

Be sure to disconnect the microphone from this receiver

upon completion of the Auto MCACC setup.

The settings made in the Auto MCACC Setup should give

you excellent surround sound from your system, but it is

also possible to adjust these settings manually using the

System Setup menu (starting on page 34).

Note

1 You can’t use the System Setup menu in either the main or sub zone when the iPod, XM or SIRIUS Radio input source is selected.

2• If you are planning on bi-amping your front speakers, or setting up a separate speaker system in another room, read through

Surround back speaker

setting

on page 36 and make sure to connect your speakers as necessary before continuing to step 4.

• If you have THX-certified speakers, select

Option

and choose

YES

for the

THX Speaker

setting.

3 The six MCACC presets are used for storing surround sound settings for different listening positions. Simply choose an unused preset for now (you can

rename it later in

Data Management

on page 42).

4 Do not adjust the volume during the test tones. This may result in incorrect speaker settings.

RECEIVER

SOURCE

SYSTEM OFF

INPUT

SELECT

TUNE

ST ST

TV DVR 1

TV CTRL

iPod

RECEIVER

TUNER

HDMI 1

DVD

ZONE 2HDMI 2 CD

CD-R/TAPE

DVR 2

XM RADIO

SIRIUS

MIDNIGHT/

LOUDNESS

DIMMER

SR+

+10

D.ACCESS

DIALOG E

CLASS

DISC

ENTER

TV CONTROL

VOL

TUNE

INPUT

SELECT

TV CH

TV VOL

ENTER

TOP MENU

AV P AR AM ETER CH LEVEL

T. EDIT

RETURN

GUIDE

BAND

SETUP

PHONES

MCACC

SETUP MIC

DIGITAL INAUDIO RLVIDEO

VIDEO/GAME

INPUT

VIDEO

SYSTEM

SETUP

TUNING/

STATIO N

TUNER

EDIT

SPEAKERSRETURN

TONE

MULTI JOG

1.Auto MCACC

Surr Back System

[ Normal (SB) ]

Data Save to

[M1. MEMORY 1 ]

Setting Start? [OK]

[Option]

ENTER:Next :Cancel

5 If you’re using the front panel display, the diagram in

Listening to Surround Sound

above indicates (in bold) how each speaker is displayed.

6 You can also choose to view the settings from the

MCACC Data Check

screen. See

Automatic MCACC (Expert)

on page 34 for more on this.

7• Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12 cm (5 inches) will end up with different size

settings. You can correct the setting manually using the

Manual speaker setup

on page 43.

• The subwoofer distance setting may be farther than the actual distance from the listening position. This setting should be accurate (taking delay and

room characteristics into account) and generally does not need to be changed.

1.Auto MCACC

Now Analyzing

…

(2/9)

Environment Check

Ambient Noise [ OK ]

Microphone [ ]

Speaker YES/NO [ ]

:Cancel

1.Auto MCACC

Check!

Front [ YES ]

Center [ YES ]

Surround [ YES ]

SB [ Yx2 ]

SUB W. [ YES ]

:Cancel

10 : Next

VSX-9120TXH_KU.book 9 ページ２００７年４月１２日　木曜日　午前１１時４７分

Pioneer VSX-9120TXH-k Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-9120TXH-k

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info