Bedienungsanleitung Pioneer VSX-9120TXH-k (Seite 68 von 88) (Englisch)

574198

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Controlling the rest of your system

• The remote controls should be 3 cm to 5 cm (1 to 2

inches) apart.

5 Press the corresponding button on the other

remote control that is sending (teaching) the signal to

this receiver’s remote control.

For example, if you want to learn the playback control

signal, press and hold



briefly. The LCD display will

show

if the operation has been learned.

If for some reasons the operation hasn’t been learned the

LCD will display

ERROR

briefly and then display

PRES

KEY

again. If this happens, keep pressing the (teaching)

button as you vary the distance between the two remotes,

until the LCD display shows

Certain buttons represent operations that cannot be

learned from other remote controls.

The buttons

available are shown below (with the exception of the TV

controls, a combination of

SHIFT

and these buttons can

also be learned):

6 To program additional signals for the current

component repeat steps 4 and 5.

To program signals for another component, exit and

repeat steps 1 through 5.

7 Press and hold the RECEIVER button for a couple of

seconds to exit and store the operation(s).

Erasing one of the remote control

button settings

This erases one of the buttons you have programmed and

restores the button to the factory default.

1 While pressing the RECEIVER button, press

SETUP

The remote LCD display shows

SETUP

2 Use

/

to select

ERASE

then press

ENTER

The LCD on the remote prompts you for the component

corresponding to the button setting to be erased.

3 Press the input source button corresponding to the

command to be erased then press

ENTER

The LCD display flashes

PRES KEY

4 Press and hold the button to be erased for two

seconds.

The LCD display shows

NO CODE

to confirm the

button has been erased.

5 Repeat step 4 to erase other buttons.

6 Press and hold the RECEIVER button for a couple of

seconds when you’re done.

Resetting the remote control presets

This will erase all preset remote control preset codes and

programmed buttons.

1 While pressing the RECEIVER button, press

SETUP

The remote LCD display shows

SETUP

2 Use

/

to select

RESET

then press

ENTER

RESET

flashes in the LCD display.

3 Press and hold

ENTER for about two seconds

The LCD shows

to confirm the remote presets have

been erased.

Confirming preset codes

Use this feature to check which preset code is assigned

to an input source button.

1 While pressing the RECEIVER button, press

SETUP

The remote LCD display shows

SETUP

2 Use

/

to select READ ID then press

ENTER

The LCD on the remote prompts you for the input source

button you want to check.

Note

1 Note that interference from TVs or other devices will sometimes result in the remote control learning the wrong signal.

2• Some commands from other remote controls cannot be learned, but in most cases the remotes just need to be moved closer together or farther apart.

• If the remote LCD shows

FULL

, it means the memory is full. See

Erasing one of the remote control button settings

below to erase a programmed button

you’re not using to free up more memory (note that some signals may take more memory than others).

3 Note that the number key decimal button (

+10

D.ACCESS

) may not be learned with some components.

3 cm to 5 cm

(1 to 2 inches)

SLEEP

ANALOG

ATT

DISC

VIDEO

SEL

DIMMER

CLASS

D.ACCESS

RECEIVER SOURCE

SYSTEM OFF

INPUT

SELECT

ENTER

TV CONTROL

SHIFT

VOL

DVD SAT

VIDEO 1 TV CONT

DVR1

TUNE

ST ST

STATUS

MCACC S.DIRECT

MULTI OPE

SIGNAL SEL

SBch

STEREO

MEMORY

TV CH

INPUT

SELECT

MPX

AUDIO SUBTITLE

ADV. SURR

STANDARD

ISOPHASE

THX

DTV INFO

MUTE

REC

TV VOL

i Pod

TUNER

RECEIVER

ENTER

REC STOP

HDD

DVD

AV PARAMETER

TOP MENU ì

DTV MENU

CH LEVEL

T.EDIT

BAND

GUIDE



RETURN

SETUP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-9120TXH-k Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-9120TXH-k

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info