Bedienungsanleitung Pioneer VSX-9140TXH (Seite 78 von 123) (Englisch)

574068

Zoom out

Zoom in

Vorherige Seite

1/123

Nächste Seite

The Advanced MCACC menu

Automatic MCACC (Expert)

If your setup requires more detailed settings than those

provided in Automatically setting up for surround sound

(Auto MCACC) on page 41, you can customize your setup

options below. You can calibrate your system differently

for up to six different MCACC presets

, which are useful

if you have different listening positions depending on the

type of source (for example, watching movies from a sofa,

or playing a video game close to the TV).

Important

•Make sure the microphone/speakers are not moved

during the Auto MCACC Setup.

• Using the Auto MCACC Setup will overwrite any

existing settings for the MCACC preset you select.

•The screen saver will automatically appear after five

minutes of inactivity.

CAUTION

• The test tones used in the Auto MCACC Setup are

output at high volume.

THX

THX is a trademark of THX Ltd., which may be registered

in some jurisdictions. All rights r eserved.

1 Select ‘

Auto MCACC

’ from the

Advanced MCACC

menu, then press

ENTER

If the Advanced MCACC screen is not displayed, refer to

Making receiver settings from the Advanced MCACC menu

on page 77.

2 Select the parameters you want to set.

Use / to select the item, then use / to set.

• Auto MCACC – The default is ALL (recommended),

but you can limit the system calibration to only one

setting (to save time) if you want.

The available

options are ALL, Keep SP System,

Speaker

Setting, Channel Level, Speaker Distance and EQ

Pro & S-Wave.

• EQ Type (only available when the Auto MCACC

Menu above is EQ Pro & S-Wave) – This determines

how the frequency balance is adjusted.

After a single calibration is performed, each of the

following three correction curves can be stored

separately in the MCACC memory. SYMMETRY (default)

implements symmetric correction for each pair of left

and right speakers to flatten the frequency-amplitude

characteristics. ALL CH ADJ is a ‘flat’ setting where all

the speakers are set individually so no special weighting

is given to any one channel. FRONT ALIGN

sets all

speakers in accordance with the front speaker settings

(no equalization is applied to the front left and right

channels).

• THX Speaker (only available when the Auto MCACC

Menu above is ALL or Speaker Setting) – Select YES

if you are using THX speakers (set all speakers to

SMALL), otherwise leave it set to NO.

• STAND.WAVE Multi-Point (only available when the

Auto MCACC Menu above is EQ Pro & S-Wave) – In

addition to measurements at the listening position,

you can use two more reference points for which test

tones will be analyzed for standing waves. This is

useful if you want to get a balanced ‘flat’ calibration

for several seating positions in your listening area.

Place the microphone at the reference point

indicated on-screen and note the last microphone

placement will be at your main listening position:

Note

1 These are stored in memory and referred to as MEMORY1 to MEMORY6 until you rename them in Data Management on page 88.

2 You may also want to have separate calibration settings for the same listening position, depending on how you’re using your system.

3Except in cases where you are only adjusting one parameter (i.e. channel level) from the Auto MCACC menu (step 2).

a. Full Auto MCACC

b. Auto MCACC

c. Manual MCACC

d. Demo

1.Advanced MCACC

A/V RECEIVER

Exit Return

ALL

1b.Auto MCACC

START

Exit

A/V RECEIVER

Return

Speaker Setting

Channel Level

Speaker Distance

EQ Pro & S-Wave

SYMMETRY : M1.MEMORY 1

ALL CH ADJ : M2.MEMORY 2

FRONT ALIGH : M3.MEMORY 3

THX Speaker : NO

4• The EQ Pro & S-Wave measurement is also taken when Keep SP System or EQ Pro & S-Wave is selected. See Acoustic Calibration EQ

Professional on page 83 for more on this.

• Either effect of Acoustic Calibration EQ Professional and Standing Wave can be switched on and off in the respective MCACC preset. For

details, see Setting the Audio options on page 66.

5The Keep SP System option allows you to calibrate your system while leaving your current speaker setting (page 91) unchanged.

6 If you selected ALL as your Auto MCACC menu, you can specify the MCACC preset where you want to save the ALL CH ADJ and FRONT

ALIGN settings.

7 Switch the Multi-Point setting NO if you only use one listening position.

ALL

1b.Auto MCACC

START

Exit

A/V RECEIVER

Return

Speaker Setting

Channel Level

Speaker Distance

EQ Pro & S-Wave

SYMMETRY : M1.MEMORY 1

ALL CH ADJ : M2.MEMORY 2

FRONT ALIGH : M3.MEMORY 3

THX Speaker : NO

ALL

SYMMETRY : M1.MEMORY 1

1b.Auto MCACC

ALL CH ADJ : M2.MEMORY 2

FRONT ALIGH : M3.MEMORY 3

START

A/V RECEIVER

Exit Return

Speaker Setting

Channel Level

Speaker Distance

EQ Pro & S-Wave

THX Speaker : NO

VSX-9140TXH_CUXJ.book 78 ページ２００９年４月１６日　木曜日　午前１０時３６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-9140TXH Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info