Bedienungsanleitung Pioneer VSX-9140TXH (Seite 83 von 123) (Englisch)

574068

Zoom out

Zoom in

Vorherige Seite

1/123

Nächste Seite

The Advanced MCACC menu

2 Adjust the parameters for the Standing Wave

Control.

• Filter Channel – Select the channel to which you will

apply the filter(s): MAIN (all except center channel

and subwoofer), Center or SW (subwoofer).

• TRIM (only available when the filter channel above is

SW) – Adjust the subwoofer channel level (to

compensate for the difference in output p ost-filter).

• Freq / Q / ATT – These are the filter parameters where

Freq represents the frequency you will be targeting

and Q is the bandwidth (the higher the Q, the

narrower the bandwidth, or range) of the attenuation

(ATT, the amount of reduction to the targeted

frequency).

3 When you’re finished, press

RETURN

You will return to the Manual MCACC setup menu.

Acoustic Calibration EQ Adjust

• Default setting: ON

/0.0dB (all channels/bands)

Acoustic Calibration Equalization is a kind of room

equalizer for your speakers (excluding the subwoofer). It

works by measuring the acoustic characteristics of your

room and neutralizing the ambient characteristics that

can color the original source material (providing a ‘flat’

equalization setting). If you’re not satisfied with the

adjustment provided in Automatically setting up for

surround sound (Auto MCACC) on page 41 or Automatic

MCACC (Expert) on page 78, you can also adjust these

settings manually to get a frequency balance that suits

your tastes.

1 Select ‘

EQ Adjust

’ from the

Manual MCACC

setup

menu.

2 Select the channel(s) you want and adjust to your

liking.

Use / to select the channel.

Use / to select the frequency and / to boost or

cut the EQ. When you’re finished, go back to the top of

the screen and press  to return to Ch, then use / to

select the channel.

•The OVER! indicator shows in the display if the

frequency adjustment is too drastic and might

distort. If this happens, bring the level down until

OVER! disappears from the display.

Tip

•Changing the frequency curve of one channel too

drastically will affect the overall balance. If the speaker

balance seems uneven, you can raise or lower channel

levels using test tones with the

TRIM

feature. Use

/



to select

TRIM

, then use

/

to raise or lower the

channel level for the current speaker.

3 When you’re finished, press

RETURN

You will return to the Manual MCACC setup menu.

Acoustic Calibration EQ Professional

This setup minimizes the unwanted effects of room

reverberation by allowing you to calibrate your system

based on the direct sound coming from the speakers. It

can also provide you with a graphical output of the

frequency response of your room.

How to use Acoustic Calibration EQ Professional

If you find that lower frequencies seem overly reverberant

in your listening room (i.e. it sounds ‘boomy’), or that

different channels seem to exhibit different reverb

characteristics, select EQ Pro & S-Wave (or ALL) for the

Auto MCACC setting in Automatic MCACC (Expert) on

page 78 to calibrate the room automatically. This should

provide a balanced calibration that suits the

characteristics of your listening room.

If you still aren’t satisfied with the results, the manual

Advanced EQ Setup (below) provides a more

customized calibr ation of your system using the direct

sound of the speakers. This is done with the help of a

graphical output that can be displayed on-screen, or

using a

mputer (with software available from Pioneer

— see Output PC on page 88).

Note

1 When EQ Adjust is selected for an MCACC preset memory where EQ is set to OFF in the AUDIO PARAMETER, EQ ON is automatically

selected.

1. Fine Channel Level

2. Fine SP Distance

3. Standing Wave

1c.Manual MCACC

4. EQ Adjust

5. EQ Professional

A/V RECEIVER

Exit Return

1c4.EQ Adjust

Exit Finish

0.0Ch : L -6.0-8.0 0.0 +8.5+3.0 +8.5 0.0 0.0+3.0

A/V RECEIVER

[Hz]

125

[Hz]

250

[Hz]

500

[Hz]

16k

[Hz]

TRIM

MCACC

M1.MEMORY1

2 This system allows you to customize your system calibration with the help of a graphical output that can be displayed on-screen, or using a

computer (with software available from Pioneer—see Output PC on page 88 for more on this).

VSX-9140TXH_CUXJ.book 83 ページ２００９年４月１６日　木曜日　午前１０時３６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-9140TXH Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info