Bedienungsanleitung Pioneer VSX-918V (Seite 7 von 76) (Englisch)

794004

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

5 minute guide 02

English Français

Deutsch

Nederlands

Italiano Español

Chapter 2:

5 minute guide

Introduction to home theater

Home theater refers to the use of multiple

audio tracks to create a surround sound effect,

making you feel like you’re in the middle of the

action or concert. The surround sound you get

from a home theater system depends not only

on your speaker setup, but also on the source

and the sound settings of the receiver.

This receiver will automatically decode

multichannel Dolby Digital, DTS, or Dolby

Surround sources according to your speaker

setup. In most cases, you won’t have to make

changes for realistic surround sound, but

other possibilities (like listening to a CD with

multichannel surround sound) are explained in

Listening to your system

on page 30.

Listening to Surround Sound

With the following quick setup guide, you

should have your system hooked up for

surround sound in no time at all. In most

cases, you can simply leave the receiver in the

default settings.

•Be sure to complete all connections before

connecting to an AC power source.

1 Connect your DVD player and TV.

See

Connecting a DVD player and TV

on page 12

to do this. For surround sound, you’ll want to

hook up using a digital connection from the

DVD player to the receiver.

2Connect your speakers and place them for

optimal surround sound.

See

Connecting the speakers

on page 20.

Where you place the speakers will have a big

effect on the sound. Place your speakers as

shown below for the best surround sound

effect. Also see

Hints on speaker placement

page 21 for more on this.

3 Plug in and switch on the receiver,

followed by your DVD player, subwoofer and

TV.

Make sure you’ve set the video input on your

TV to this receiver. Check the manual that

came with the TV if you don’t know how to do

this.

4 Use the on-screen automatic MCACC

setup to set up your system.

See

Automatically setting up for surround

sound (MCACC)

on page 8 for more on this.

5 Play a DVD, and adjust the volume.

Make sure that

DVD/BD

is showing in the

receiver’s display. If it isn’t, press

DVD

on the

remote to set the receiver to the DVD input.

There are several other sound options you can

select. See

Listening to your system

on page 30

for more on this.

Note

1You may need to set your DVD player to output Dolby Digital, DTS and 88.2 kHz/96 kHz PCM (2 channel) audio (see your DVD

player’s manual for more on this).

2Depending on your DVD player or source disc, you may only get 2 channel sound. In this case, the listening mode must be set

STANDARD

(see

Listening in surround sound

on page 30 if you need to do this) if you want multichannel surround sound.

Front

Left (L)

Surround

Left (LS)

Surround

Right (RS)

Center (C)

Subwoofer (SW)

Listening

position

Front

Right (R)

VSX_918_818_KU.book 7 ページ２００７年１１月２８日　水曜日　午後６時５８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-918V Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info