Bedienungsanleitung Pioneer VSX-918V (Seite 10 von 76) (Englisch)

794004

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

5 minute guide02

You can also choose to view the settings by

selecting individual parameters from the

Analyzed Data Check

screen:

•

Speaker Setting

– The size and number of

speakers you’ve connected (see page 42

for more on this)

•

Speaker Distance

– The distance of your

speakers from the listening position (see

page 45 for more on this)

•

Channel Level

– The overall balance of

your speaker system (see page 44 for more

on this)

•

Acoustic Cal EQ

– Adjustments to the

frequency balance of your speaker system

based on the acoustic characteristics of

your room (see page 40 for more on this)

Press

RETURN

after you have finished

checking each screen. When you’re finished,

select

SKIP

to go back to the System Setup

menu.

Other problems when using the Auto

MCACC Setup

If the room environment is not optimal for the

Auto MCACC Setup (too much background

noise, echo off the walls, obstacles blocking

the speakers from the microphone) the final

settings may be incorrect. Check for household

appliances (air conditioner, fridge, fan, etc.),

that may be affecting the environment and

switch them off if necessary. If there are any

instructions showing in the front panel display,

please follow them.

• Some older TVs may interfere with the

operation of the microphone. If this seems

to be happening, switch off the TV when

doing the Auto MCACC Setup.

Better sound using Phase

Control

This receiver’s Phase Control feature uses

phase correction measures to make sure your

sound source arrives at the listening position

in phase, preventing unwanted distortion and/

or coloring of the sound (see illustration

below).

Phase Control technology provides coherent

sound reproduction through the use of phase

matching

for an optimal sound image at your

listening position. The default setting is on and

we recommend leaving Phase Control

switched on for all sound sources.

•Press PHASE (PHASE CONTROL) to switch

on phase correction.

Note

1Phase matching is a very important factor in achieving proper sound reproduction. If two waveforms are ‘in phase’, they crest

and trough together, resulting in increased amplitude, clarity and presence of the sound signal. If a crest of a wave meets a

trough (as shown in the upper section of the diagram above) then the sound will be ‘out of phase’ and an unreliable sound

image will be produced.

Sound

source

Sound

source

Listening

position

Listening

position

Front speaker

Subwoofer

Front speaker

Subwoofer

AUTO/ DIRECT

PHASE

ADV SURR

SOUND

RETRIEVER

STEREO/

A.L.C.

ACOUSTIC

STANDARD

DIALOG

VSX_918_818_KU.book 10 ページ２００７年１１月２８日　水曜日　午後６時５８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-918V Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info