Bedienungsanleitung Pioneer VSX-920-K (Seite 57 von 400) (Englisch, Französisch)

574201

Zoom out

Zoom in

Vorherige Seite

1/400

Nächste Seite

Listening to your system 06

English

Français

Deutsch

Nederlands

Italiano

Español

Chapter 6:

Listening to your system

Important

• The listening modes and many features

described in this section may not be

available depending on the current source,

settings and status of the receiver.

Auto playback

There are many ways to listen back to sources

using this receiver, but the simplest, most

direct listening option is the Auto Surround

feature. The receiver automatically detects

what kind of source you’re playing and selects

multichannel or stereo playback as

necessary.

• While listening to a source, press

, then press

AUTO/ALC/DIRECT

for auto playback of a source.

AUTO SURROUND shows briefly in the display

before showing the decoding or playback

format. Check the digital format indicators in

the front panel display to see how the source is

being processed.

• If the source is Dolby Digital, DTS, or Dolby

Surround encoded, the proper decoding

format will automatically be selected and

shows in the display.

• When listening to the FM radio, the Neural

Surround feature is selected automatically

(see Using Neural Surround on page 50 for

more on this).

• When listening to the ADAPTER PORT

input, the SOUND RETRIEVER AIR feature

is selected automatically (see Listening in

stereo on page 59 for more on this).

ALC – In the Auto level control (ALC) mode,

this receiver equalizes playback sound levels.

Tip

•When ALC is selected, the effect level can

be adjusted using the EFFECT parameter

in Setting the Audio options on page 68.

Listening in surround sound

Using this receiver, you can listen to any

source in surround sound. However, the

options available will depend on your speaker

setup and the type of source you’re listening

to.

Standard surround sound

The following modes provide basic surround

sound for stereo and multichannel sources.

• While listening to a source, press

, then press

STANDARD

If necessary, press repeatedly to select a

listening mode.

Note

1 Stereo surround (matrix) formats are decoded accordingly using Neo:6 CINEMA or 2 Pro Logic IIx MOVIE (see

Listening in surround sound above for more on these decoding formats).

2 • For more options using this button, see Using Stream Direct on page 60.

• The AUTO SURROUND mode cannot be selected when the HDMI audio output parameter is set to THROUGH in

Setting the Audio options on page 68.

RECEIVER

3 In modes that give 6.1 channel sound, the same signal is heard from both surround back speakers.

4 The STANDARD listening mode cannot be selected when the HDMI audio output parameter is set to THROUGH in

Setting the Audio options on page 68.

RECEIVER

VSX-1020_SYXCN.book 57 ページ２０１０年３月１２日　金曜日　午前９時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-920-K Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-920-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info