Bedienungsanleitung Pioneer VSX-920-K (Seite 61 von 400) (Englisch, Französisch)

574201

Zoom out

Zoom in

Vorherige Seite

1/400

Nächste Seite

Listening to your system 06

English

Français

Deutsch

Nederlands

Italiano

Español

Selecting MCACC presets

•Default setting: MEMORY 1

If you have calibrated your system for different

listening positions

, you can switch between

settings to suit the kind of source you’re

listening to and where you’re sitting (for

example, watching movies from a sofa, or

playing a video game close to the TV).

• While listening to a source, press

, then press

MCACC

Press repeatedly to select one of the six

MCACC presets

. See Data Management on

page 98 to check and manage your current

settings.

Choosing the input signal

On this receiver, it is possible to switch the

input signals for the different inputs as

described below.

• Press , then press

SIGNAL SEL

to select the input signal corresponding to

the source component.

Each press cycles through the options as

follows:

• AUTO – The receiver selects the first

available signal in the following order:

HDMI; DIGITAL; ANALOG.

• ANALOG – Selects an analog signal.

• DIGITAL – Selects an optical or coaxial

digital signal.

• HDMI – Selects an HDMI signal.

• PCM – For PCM input signals.

The

receiver selects the first available signal in

the following order: HDMI; DIGITAL.

HDMI is not assigned by default. To select an

HDMI signal, conduct the input setup

procedure (see The Input Setup menu on

page 42).

When set to DIGITAL, HDMI or AUTO (only

selected DIGITAL or HDMI), the indicators

light according to the signal being decoded

(see Display on page 11).

Note

1 Different presets might also have separate calibration settings for the same listening position, depending on how

you’re using your system. These presets can be set in Automatically conducting optimum sound tuning (Auto MCACC)

on page 39 or Automatic MCACC (Expert) on page 87, either of which you should have already completed.

2 • These settings have no effect when headphones are connected.

• You can also press / to select the MCACC preset.

RECEIVER

3 • This receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz), DTS (including DTS 96/24) and WMA9 Pro

digital signal formats. The compatible signals via the HDMI terminals are: Dolby Digital, DTS, WMA9 Pro, PCM (32

kHz to 192 kHz), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio and SACD.

• You may get digital noise when an LD, CD, DVD or BD player compatible with DTS is playing an analog signal. To

prevent noise, make the proper digital connections (page 30) and set the signal input to DIGITAL.

• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your

DVD player.

4 When the HDMI audio output parameter is set to THROUGH, the sound will be heard through your TV, not from this

receiver.

5 • This is useful if you find there is a slight delay before AUTO recognizes the PCM signal on a CD, for instance.

• When PCM is selected, noise may be output during playback of non-PCM sources. Please select another input

signal if this is a problem.

RECEIVER

VSX-1020_SYXCN.book 61 ページ２０１０年３月１２日　金曜日　午前９時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-920-K Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-920-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info