Bedienungsanleitung Pioneer VSX-920-K (Seite 64 von 400) (Englisch, Französisch)

574201

Zoom out

Zoom in

Vorherige Seite

1/400

Nächste Seite

Control with HDMI function07

HDMI Setup

You must adjust the settings of this receiver as

well as the connected Control with HDMI-

compatible components in order to make use

of the Control with HDMI function. For more

information see the operating instructions for

each component.

1 Press , then press

Home Menu

2 Select ‘

System Setup

’, then press

ENTER

3 Select ‘

Other Setup

’, then press

ENTER

4 Select ‘

HDMI Setup

’, then press

ENTER

5 Select the ‘

Control

’ setting you want.

Choose whether to set this unit’s Control with

HDMI function ON or OFF. You will need to set

it to ON to use the Control with HDMI

function.

When using a component that does not

support the Control with HDMI function, set

this to OFF.

• ON – Enables the Control with HDMI

function. When this unit’s power is turned

off and you have a supported source begin

playback while using the Control with

HDMI function, the audio and video

outputs from the HDMI connection are

output from the TV.

• OFF – The Control with HDMI is disabled.

Synchronized operations cannot be used.

When this unit’s power is turned off, audio

and video of sources connected via HDMI

are not output.

6 Select the ‘

Control Mode

’ setting you

want.

Choose whether you want to enable HDMI

for all linked functions or the PQLS function

only. However, Display Power Off will

activate the settings set forth in step 7 below.

• ALL – Enabled for all linked functions.

• PQLS – Enabled only for the PQLS

function. When PQLS is selected, link

functions other than the PQLS function

may not work properly. If you wish to use

all link functions, select ALL.

7 Select the ‘

Display Power Off

’ setting

you want.

If the TV’s power is turned off while using the

Control with HDMI function, the receiver’s

power is also turned off (all power off

function). This function can be disabled.

• YES – The all power off function is enabled.

The receiver’s power turns off together with

the TV’s power.

This function only works when the input

for a component connected to the

receiver by Control with HDMI is

selected or when watching the TV.

• NO – The all power off function is disabled.

The receiver’s power is not affected when

the TV’s power is turned off.

8 When you’re finished, press

HOME MENU

You will return to the Home Menu.

RECEIVER

2. Volume Setup

Remote Control Mode Setup

Flicker Reduction Setup

5. Pairing Bluetooth Device

1. HDMI Setup

4e.Other Setup

A/V RECEIVER

Exit Return

4e1.HDMI Setup

A/V RECEIVER

Exit Finish

Control : ON

Control mode : ALL

Display Power Off : YES

VSX-1020_SYXCN.book 64 ページ２０１０年３月１２日　金曜日　午前９時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-920-K Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-920-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info