Bedienungsanleitung Pioneer VSX-920-K (Seite 70 von 400) (Englisch, Französisch)

574201

Zoom out

Zoom in

Vorherige Seite

1/400

Nächste Seite

Using other functions08

C. WIDTH

(Center Width)

(Applicable only

when using a center

speaker)

Provides a better blend of the front speakers by spreading the

center channel between the front right and left speakers, making

it sound wider (higher settings) or narrower (lower settings).

0 to 7

Default: 3

DIMENSION

Adjusts the depth of the surround sound balance from front to

back, making the sound more distant (minus settings), or more

forward (positive settings).

–3 to +3

Default: 0

PANORAMA

Extends the front stereo image to include the surround speakers

for a ‘wraparound’ effect.

OFF

C. IMAGE

(Center Image)

(Applicable only

when using a center

speaker)

Adjusts the center image to create a wider stereo effect with

vocals. Adjust the effect from 0 (all center channel sent to front

right and left speakers) to 10 (center channel sent to the center

speaker only).

0 to 10

Defaults:

Neo:6 MUSIC: 3

Neo:6 CINEMA: 10

EFFECT Sets the effect level for the currently selected Advanced Surround

or ALC mode (each mode can be set separately).

10 to 90

Defaults: 50

(90 for EXT.STEREO

only)

H.GAIN

(Height Gain)

Adjusts the output from the front height speaker when listening in

DOLBY PLIIz HEIGHT mode. If set to HIGH, the sound from the

top will be more emphasized.

LOW

MID

HIGH

V.SB

(Virtual Surround

Back)

When you’re not using surround back speakers, selecting this

mode allows you to hear a virtual surround back channel through

your surround speakers. You can choose to listen to sources with

no surround back channel information, or if the material sounds

better in the format (for example, 5.1) for which it was originally

encoded, you can have the receiver only apply this effect to 6.1

encoded sources like Dolby Digital EX or DTS-ES.

OFF

V.HEIGHT

(Virtual Front

Height)

When you’re not using front height speakers, selecting this mode

allows you to hear a virtual front height channel through your front

speakers.

OFF

a.When EQ OFF is selected, the MCACC indicator does not light.

b.This setting is only displayed when the listening mode is Stereo, Auto surround (STEREO) or SOUND RETRIEVER AIR.

c.The adjustment can be made only when TONE is set to ON.

d.With the iPod/USB, INTERNET RADIO or ADAPTER PORT input function, by default S.RTRV is set to ON.

e.UP1 to UP4 can be selected only when the front height speaker is connected. The presence or absence of effects

depends on the listening mode.

f. The initially set AUTO is only available for Dolby TrueHD signals. Select MAX or MID for signals other than Dolby

TrueHD.

g.You shouldn’t have any problems using this with most SACD discs, but if the sound distorts, it is best to switch the

gain setting back to 0 dB.

h.•The HDMI Audio setting cannot be switched while performing synchronized amp mode operations.

• The synchronized amp mode must be turned on in order to play the receiver’s HDMI audio and video input signals

from the TV with the receiver’s power in the standby mode. See About synchronized operations on page 65.

Setting What it does Option(s)

VSX-1020_SYXCN.book 70 ページ２０１０年３月１２日　金曜日　午前９時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-920-K Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-920-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info