Bedienungsanleitung Pioneer VSX-920-K (Seite 81 von 400) (Englisch, Französisch)

574201

Zoom out

Zoom in

Vorherige Seite

1/400

Nächste Seite

Controlling the rest of your system 09

English

Français

Deutsch

Nederlands

Italiano

Español

Multi operation and System off

The Multi operation feature allows you to

program a series of up to 5 commands for the

components in your system.

• Be sure to call up the preset codes of

devices or perform programming signals

for other remote controls before multi

operation memory programming

(page 78)

The Multi operation feature makes it easy to

perform the following operations by pressing

just two buttons.

Press MULTI OPERATION and then the DVD

input function button to:

1. Switch this receiver on.

2. Switch this receiver’s input to DVD.

3. Transmit a sequence of up to five

programmed commands.

Similar to Multi operations, System off allows

you to use two buttons to stop and switch off a

series of components in your system at the

same time.

Only one System off operation

sequence may be programmed.

Press

MULTI OPERATION

and then



SOURCE

to:

1. Transmit a sequence of up to five

programmed commands.

2. Switch off all Pioneer devices including the

receiver (except DVD recorders and VCRs).

For greater convenience, program this receiver

to perform power on/off and playback

operations on non-Pioneer devices as well.

(The signals for Pioneer devices described

above are not contingent on programming for

non-Pioneer devices.)

The buttons that can be programmed using

Multi operation or System off are the same

buttons as those that can be programmed for

other remote controls (see Programming

signals from other remote controls on page 78).

Programming a Multi operation or a

shutdown sequence

1 Press and hold

R.SETUP

, then press “3”

for three seconds.

The LED flashes continuously.

• To cancel the preset setup mode press

R.SETUP.

2 Press the input function button (or



SOURCE

button).

For Multi operations, press the input function

you wish to program (for example, if you want

to start the sequence by switching on your

DVD player, press DVD).

For System off, press the  SOURCE button.

The LED blinks twice and flashes

continuously.

3 If necessary, press the input function

button for the component whose command

you want to input.

This is only necessary if the command is for a

new component (input function).

4 Select the button for the command you

want to input.

The LED blinks once and flashes continuously.

• You don’t need to program the receiver to

switch on or off. This is done automatically.

Note

1 • Before Multi operation and System off will work correctly, you must setup the remote to work with your TV and other

components (see Operating multiple receivers on page 77 for more on this).

• Some units may take some time to power up, in which case multiple operations may not be possible.

• Power on and off commands only work with components that have a standby mode.

2 Some remote controllers for other manufacturers' devices use the same signals for switching the power on and off.

In some cases, even if this receiver is programmed to perform these commands, power to the non-Pioneer devices

may not be switched on and off correctly. Program the receiver to perform these commands if the non-Pioneer device

uses separate signals for power on/off.

3 With Multi operation, the HDMI and TV CTRL settings cannot be made, but the iPod USB settings can. For other

settable input functions, see Setting the remote to control other components on page 77.

VSX-1020_SYXCN.book 81 ページ２０１０年３月１２日　金曜日　午前９時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-920-K Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-920-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info