Bedienungsanleitung Pioneer VSX-922S (Seite 32 von 109) (Englisch)

491804

Zoom out

Zoom in

Vorherige Seite

1/109

Nächste Seite

Basic Setup

Changing the OSD display language (OSD Language)

The language used on the Graphical User Interface screen can be changed.

! The explanations in these operating instructions are for when English is selected for the GUI screen.

! The OSD display is only displayed when the receiver’s HDMI OUT terminal and the TV’s HDMI input are con-

nected with an HDMI cable. If the TV is connected with anything other than an HDMI cable, watch the front

panel display while performing the various operations and making settings.

1 Press u RECEIVER to switch on the receiver and your TV.

Make sure that the TV’s video input is set to this receiver (for example, if you connected this receiver to the VIDEO

jacks on your TV, make sure that the VIDEO input is now selected).

2 Press on the remote control, then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

3 Select ‘System Setup’ from the Home Menu.

4 Select ‘OSD Language’ from the System Setup menu.

5 Select the desired language.

6 Select ‘OK’ to change the language.

The setting is completed and the System Setup menu reappears automatically.

Automatically conducting optimum sound tuning (Full Auto

MCACC)

The Full Auto MCACC Setup measures the acoustic characteristics of your listening area, taking into account

ambient noise, speaker connection and speaker size, and tests for both channel delay and channel level. After

you have set up the microphone provided with your system, the receiver uses the information from a series of test

tones to optimize the speaker settings and equalization for your particular room.

Important

! Make sure the microphone and speakers are not moved during the Full Auto MCACC Setup.

! Using the Full Auto MCACC Setup will overwrite any existing settings for the MCACC preset you select.

! Before using the Full Auto MCACC Setup, the headphones should be disconnected.

! The OSD display is only displayed when the receiver’s HDMI OUT terminal and the TV’s HDMI input are con-

nected with an HDMI cable. If the TV is connected with anything other than an HDMI cable, watch the front

panel display while performing the various operations and making settings.

CAUTION

! The test tones used in the Full Auto MCACC Setup are output at high volume.

THX

1 Press u RECEIVER to switch on the receiver and your TV.

Make sure that the TV’s video input is set to this receiver.

2 Connect the microphone to the MCACC SETUP MIC jack on the front panel.

CONTROL ON

OFF

MCACC

SETUP MIC

iPod

iPhone

iPad

USB

VIDEO

HDMI 5 INPUT

Microphone

Tripod

Make sure there are no obstacles between the speakers and the microphone.

If you have a tripod, use it to place the microphone so that it’s about ear level at your normal listening position. If

you do not have a tripod, use some other object to install the microphone.

Install the microphone on a stable floor. Placing the microphone on any of the following surfaces may make

accurate measurement impossible:

! Sofas or other soft surfaces.

! High places such as tabletops and sofa tops.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-922S Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-922S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info