Bedienungsanleitung Pioneer VSX-AX5i-S (Seite 15 von 120) (Englisch)

574069

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Easy Setup Guide Part 2

EASY SETUP GUIDE

12 Use the  buttons to select a

speaker press ENTER. Then use the

 buttons to select the size of

each speaker individually. Press

ENTER. Use the  buttons to

select OK and press ENTER.

The system will output another series of test tones

to establish the proper channel level, channel

delay and acoustic calibration EQ. Again, be pre-

pared for loud test tones.

After it has finished, you see the SPEAKER SYS-

TEMS CHECK screen. If you want to view the set-

tings select NEXT and press ENTER repeatedly. If

not, simply go to the next step.

13 Select EXIT and press ENTER to go

back to the SURROUND SETUP

menu. Then choose EXIT twice to

return to normal use.

You should now have settings that will give you

good surround sound. The MCACC indicator will

light and the surround sound settings are com-

plete.

2 Playing a DVD with Surround Sound

1 Make sure the receiver, your TV, your subwoofer and your DVD player are

switched ON.

2 Press the DVD/LD button on the remote control.

You should see DVD/LD in the display on the receiver.

3 Play a DVD then adjust the MASTER VOLUME.

Memo:

To get a more refined sound, make the sound settings in “EXPERT Setup” on page 96.

If you're having trouble getting surround sound playback look at this Frequently

Asked Questions (FAQ) guide:

Q1: Even though I'm playing a DVD I'm not getting 5.1 channel playback.

A1: Either the DVD is not set for digital output, or the Dolby Digital/DTS output settings are not correct.

Set the DVD player to output a digital signal and set the Dolby Digital and DTS output properly. If you are

unsure how to do this check the DVD initial setup in the manual that came with your DVD player.

Q2: There is no sound from the subwoofer or it is very low.

A2: There is a good possibility you haven't reached a part of the DVD that has an LFE channel (which feeds

the subwoofer) yet. The LFE channel only appears in selected parts of the soundtrack. Continue playing

and listen for the subwoofer.

If you want to hear more sound from the subwoofer set it to PLUS (see page 41 for more information and con-

sult the Memo on page 42).

Memo:

• Make sure the room environment follows the

guidelines displayed on the OSD during auto

setup. If the room environment is not optimal

for auto setup (too much ambient noise,

obstacles blocking the speakers from the

microphone, etc.) the final settings may be

incorrect. Check for household appliances (air

conditioner, fridge, fan, etc.) that may be

affecting the environment and switch them off

if necessary.

• Screens will turn off after three minutes and

the receiver will automatically exit from the

setup process.

• If you leave CHECK!! or other error message

on the screen for three minutes, or you

choose CANCEL at anytime during the setup,

the settings made up to that point will be

cleared.

• After completing the Auto Surround Sound

Setup, ACOUSTIC CAL EQ ON (ALL CH

ADJUST) is set automatically.

• Some older TVs may interfere with the

operation of the mic. If this is the case turn the

TV off when doing Auto Surround Sound

Setup.

VSX-AX5i.book Page 15 Friday, May 23, 2003 6:33 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-AX5i-S Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-AX5i-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info