455261
22
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
22
En
04
Automatic Switching between Analog & Digital Signals
This receiver will automatically choose the digital signal when both analog and digital signals
are input into the receiver.
The digital indicator will light when a digital signal is being used by the receiver. If the digital indicator doesn‘t
light even though you have your DVD player connected with an optical cable it may be due to the problems
below. Please check the list if you experience this problem.
The power cord to the DVD player is disconnected.
The DVD player’s digital output setting is turned off.
You’re playing a disc that doesn’t output a digital signal.
You’ve selected the Analog input mode (see page 39).
MEMO:
There is also a way to select an analog input whether a digital signal is being input or not. To do this see “Analog
Input Mode” on page 39.
Checking the Settings on Your DVD (or other) Player
If you don’t set the following two features correctly you may experience problems with your surround sound (for
example: no sound whatsoever; the sound is unidimensional or lacks punch; or other problems).
1 Digital output from your DVD player or other component outputting a digital source,
Set the DVD player so the signals below are output from the optical terminal (if you are unsure how to do this
check the manual that came with your DVD player). It may or may not be necessary to set the digital output on
other components, like a satellite tuner. Check the manual that came with the component.
Dolby Digital
DTS
MPEG
96 kHz PCM (2 channel stereo)
2 Checking the soundtrack on your disc
Choose the surround sound signal (for example, Dolby Digital 5.1 or Dolby Surround) that you want to hear from
the disc. Check the manual that came with your DVD player for more information.
MEMO:
Depending on your DVD player or source discs you may not be able to output sound from other than digital 2
channel stereo and analog. In this case you need to change the listening mode to STANDARD if you want
multichannel surround sound.
Basic Playback
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

pioneer-vsx-c300

Suche zurücksetzen

  • Linker Lautsprecher hat normale Lautstärke, während der rechte Lautsprecher kaum hörbar ist. Eingereicht am 23-2-2018 10:32

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer VSX-C300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pioneer VSX-C300

Pioneer VSX-C300 Bedienungsanleitung - Deutsch - 56 seiten

Pioneer VSX-C300 Bedienungsanleitung - Englisch - 1 seiten

Pioneer VSX-C300 Bedienungsanleitung - Holländisch - 112 seiten

Pioneer VSX-C300 Bedienungsanleitung - Französisch, Italienisch - 112 seiten

Pioneer VSX-C300 Bedienungsanleitung - Portugiesisch - 112 seiten

Pioneer VSX-C300 Bedienungsanleitung - Spanisch - 112 seiten

Pioneer VSX-C300 Bedienungsanleitung - Schwedisch - 112 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info