Bedienungsanleitung Pioneer VSX-D709S (Seite 68 von 84) (Englisch)

574221

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Recording from Video Components

The following operations show you how to record audio and video to the video tape recorder connected to the

VCR 1, VCR 2 or DVR jacks. Note that all signals coming out of these jacks will be analog and it is not possible to

record Dolby Digital/DTS soundtracks.

The receiver's volume, channel level, balance, TONE, DIGITAL NR, MIDNIGHT, LOUDNESS and sur-

round effects have no effect on the recorded signal.

1 First, decide the component you'd like to

record and put the receiver in that function.

2 Press RECEIVER.

This switches the remote to the receiver control mode.

3 Set the SIGNAL SELECT to analog.

Press the SIGNAL SELECT button on the remote control (or

use the button on the front panel) and choose analog. Record-

ing DIGITAL signals is not possible.

4 Start recording with VCR 1 or VCR 2 (etc.).

5 Playback the source to be recorded.

Recording from Digital Audio Components

The following explanations show you how to record digital audio. Using this method you can make exact digital

copies of sources like CDs or MDs. The only drawback is that you cannot switch between various recorders at

the touch of a button like you can with analog recordings (see the previous page). If you look on the back of the

receiver you will find one digital out jack which are marked PCM/2/DTS. If you connect one of these to the

optical input on a digital recorder (currently these include MD, DAT, and CD-R), you can make direct digital

recordings with this unit. Of course, the digital components you want to record, all need to be connected to the

receiver with digital inputs as well. See p.13 if you have not made these connections.

The receiver’s volume, channel level, tone (BASS, TREBLE, and LOUDNESS), and surround

effects have no effect on the recorded signal.

1 Prepare the source you want to record and

put the receiver in that function.

2 Press RECEIVER.

This switches the remote to the receiver control mode.

3 Set SIGNAL SELECT to DIGITAL.

Press the SIGNAL SELECT button on the remote control (or use

the button on the front panel) and choose DIGITAL.

4 Start recording with a CD-R or MD (etc.).

5 Play back the source to be recorded.

In some cases, digital recordings have copy guard protections

on them and making a digital copy is not possible. It is still

possible to copy these digital sources if you have hooked the

components up with analog connections (in this case, the cop-

ies will not be exact digital reproductions). Refer to the previ-

ous page in this case.

Using Other Functions

memo

SOURCE

ENTER

LOUDNESS

INPUT ATT DIGITAL NR FL DIMMER

REMOTE SETUP SYSTEM SETUP SIGNAL SELECT

TV VOL

TVFUNK

CHANNEL

EFFECT/CH SEL

RECEIVER

TV CONTROL

MASTER VOLUME

DISC

+10

VIDEO SELECT

MULTI CONTROL

MULTI CH INPUT

DVD

CD CD-R TUN TVC

RECEIVER

1 2 3

4 5 6

7 8 9

VCR

4 ¢

ENTER

TUNE

ST ST

memo

SOURCE

ENTER

LOUDNESS

INPUT ATT DIGITAL NR FL DIMMER

REMOTE SETUP SYSTEM SETUP SIGNAL SELECT

TV VOL

TVFUNK

CHANNEL

EFFECT/CH SEL

RECEIVER

TV CONTROL

MASTER VOLUME

DISC

+10

VIDEO SELECT

MULTI CONTROL

MULTI CH INPUT

DVD

CD CD-R TUN TVC

RECEIVER

1 2 3

4 5 6

7 8 9

VCR

4 ¢

ENTER

TUNE

ST ST

memo

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-D709S Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info