Bedienungsanleitung Pioneer VSX-D710S (Seite 20 von 52) (Englisch)

455271

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Component input 1 setting

Tells the receiver What (DVD player, etc.) is connected to

this input.

Press % or ﬁ to select the component setting

(DVD, TV, VCR or OFF).

MEMO:

• The initial setting is “DVD”.

Component input 2 setting

Tells the receiver What (TV, player etc.) is connected to

this input.

Press % or ﬁ to select the component setting

(TV, VCR, OFF or DVD).

MEMO:

• The initial setting is “

TV”.

Multi Channel External Decoder

Surround Back 1ch/2ch setting (VSX-

D810S/VSX-D850S only)

You only need to make this setting if you are using a

multi channel external decoder with your DVD player. If

you aren’t just ignore this setting.

Press % or ﬁ to select the channel setting.

Select 1ch if your DVD is outputting 6.1

sound (the surround back channel is mono)

or select 2ch if your DVD is outputting 7.1

sound (the surround back channel is stereo).

Coaxial digital input setting

Here you tell the receiver what component you have

hooked up to the coaxial digital input jack.

Press % or ﬁ to select the coaxial digital

input (DVD, TV, CD, CD-R, VCR, or OFF).

After you assign the component to this digital jack

whenever you select that component, for example a

CD player, the receiver will automatically change to

the digital input setting. You can see this in the

DIGITAL/ANALOG indicator on the front of the

receiver.

MEMO:

• The initial setting is “DVD”.

Optical digital input 1 setting

Here you tell the receiver what component you have

hooked up to the optical input jack 1.

Press % or ﬁ to select the optical digital

input 1 (DVD, TV, CD, CD-R, VCR, or OFF).

After you assign a component to this digital jack

whenever you select that component, for example a

CD player, the receiver will automatically change to

the digital input setting. You can see this in the

DIGITAL/ANALOG indicator on the front of the

receiver.

MEMO:

• The initial setting is “CD”.

Optical digital input 2 setting

Here you tell the receiver what component you have

hooked up to the optical input jack 2.

Press % or ﬁ to select the optical digital

input 2 (DVD, TV, CD, CD-R, VCR, or OFF).

After you assign a component to this digital jack

whenever you select that component, for example a

CD player, the receiver will automatically change to

the digital input setting. You can see this in the

DIGITAL/ANALOG indicator on the front of the

receiver.

MEMO:

• The initial setting is “CD-R”.

Optical digital input 3 setting (VSX-

D810S/VSX-D850S only)

Here you tell the receiver what component you have

hooked up to the optical input jack 3.

Press % or ﬁ to select the optical digital

input 2 (DVD, TV, CD, CD-R, VCR, or OFF).

After you assign a component to this digital jack,

whenever you select that component, for example a

CD player, the receiver will automatically change to

the digital input setting. You can see this in the

DIGITAL/ANALOG indicator on the front of the

receiver.

MEMO:

• The initial setting is “TV”.

Preparations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-D710S Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-D710S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info