Bedienungsanleitung Pioneer VSX-D710S (Seite 32 von 52) (Englisch)

455271

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Using the Tuner

Finding a Station

The following steps show you how to tune in to FM and

AM radio broadcasts using the automatic (search) and

manual (step) tuning functions. If you already know the

exact frequency of the station you want to listen to, see

Tuning Directly to a Station on this page. Once you are

tuned to a station you can memorize the frequency for

recall later—see Memorizing Stations on page 33 for

more on how to do this.

1 Press the MULTI CONTROL TUN button on

the remote control.

On the receiver, use the MULTI JOG to select the

tuner mode.

2 Use the BAND button to change the band

(FM or AM), if necessary.

Each press switches the band between FM and AM

On the receiver, pressing the BAND button switches

between bands.

3 Tune to a station.

Automatic tuning

To search for stations in the currently selected band,

press and hold either the TUNE + or TUNE – button

for about a second. The receiver will start searching

for the next station, stopping when it has found one.

Repeat this step to search for other stations.

Manual tuning

To change the frequency one step at a time, press the

TUNE + or TUNE – (%ﬁ) buttons.

High speed tuning

Press and hold the TUNE + or TUNE – button for

high speed tuning, releasing the button once the

desired frequency is reached.

Tuning Directly to a Station

Sometimes, you'll already know the frequency of the

station you want to listen to. In this case, you can simply

enter the frequency directly using the number buttons

on the remote control (this function is not available

using the front panel controls of the receiver).

1 Press the MULTI CONTROL TUN button on

the remote control.

On the receiver, use the MULTI JOG to select the

tuner mode.

2 Press the BAND button to select either FM

or AM.

Each press switches the band between FM and AM.

On the receiver, pressing the BAND button switches

between bands.

3 Press D.ACCESS (DIRECT ACCESS).

4 Use the number buttons to enter the

frequency of the radio station.

Example: To tune to 106.00 (FM), press 1 – 0 – 6 –

0 – 0

STEREO

TUNED

MEMO:

• If you make a mistake while inputting the frequency,

press the

D.ACCESS button twice to cancel the

frequency and start again.

MPX

VOLUME

MASTER VOLUME

CHANNEL

ENTER

DISC

DTV INFO

MPX/RETURN

DTV ON/OFF DTV MENU

D.ACCESS GUIDE

TUNE

CLASS

ATT

BAND

/DTS DSP

TEST TONE

CH SELECT CH LEVEL FUNCTION

SIGNAL SELECT

1¡

EFFECT

DVD VCR CD-RTV

RCV

TUN

TVC

MIDNIGHT

LOUDNESS

MUTING

SETUP

FL DIMMER

MULTI CONTROL

5.1 / 7.1

RECEIVER

SOURCE

VOLUME

MASTER VOLUME

CHANNEL

ENTER

DISC

DTV INFO

MPX/RETURN

DTV ON/OFF DTV MENU

D.ACCESS GUIDE

TUNE

CLASS

ATT

BAND

/DTS DSP

TEST TONE

CH SELECT CH LEVEL FUNCTION

SIGNAL SELECT

1¡

EFFECT

DVD VCR CD-RTV

RCV

TUN

TVC

MIDNIGHT

LOUDNESS

MUTING

SETUP

FL DIMMER

MULTI CONTROL

5.1 / 7.1

RECEIVER

SOURCE

MPX mode

If the TUNED or STEREO indicators don't light when

tuning to an FM station because the signal is weak, press

the MPX button to switch the receiver into mono

reception mode. This should improve the sound quality

and allow you to enjoy the broadcast.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-D710S Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-D710S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info