Bedienungsanleitung Pioneer VSX-D850S (Seite 17 von 52) (Englisch)

574222

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

SPEAKERS (Front, Center, Surround)

setting mode

This setting establishes the size and configuration of the

speaker system you have connected. So, for example,

here you set whether you have connected surround

speakers or not, and how big they are. Selecting “Large”

or “Small” will determine how much bass is sent by the

receiver to the speakers being set.

In the display, “F”, “C”, and “S” refer to front, center,

and surround speakers respectively. Speaker size is

denoted as “L” for large speakers, “S” for small

speakers, and “

” (asterisk) if no speaker is connected.

Choose a speaker setting mode according to

the speakers you hooked up. Use the % or ﬁ

buttons.

The configurations shown below will appear in the

display on the front of the receiver. One of them

should match your speaker set up. Cycle through the

different possibilities until you find the one that

matches your set up.

Press # to advance to the next receiver setting, and

press @ to return to a previous receiver setting.

Preparations

SPEAKERS (Surround Back) setting

mode (VSX-D810S/D850S only)

This setting establishes the size of the speaker connected

to the surround back terminal (VSX-D810S/D850S only).

You can choose a surround back speaker and its size or

you can choose to hook a subwoofer to this terminal.

Switch the surround back speaker setting

mode according to the size of the speaker

you hooked up. Use the % or ﬁ buttons.

The configurations shown below will appear in the

display on the front of the receiver. Choose one.

Cycle through the different possibilities until you find

the one that matches your set up.

If you select SB SUBWF here you can hook a

subwoofer up to the surround back speaker terminals

(see p.13). In this case the terminals will be used for

this “passive subwoofer” and no surround back

sound will come from these terminals.

Press # to advance to the next receiver setting, and

press @ to return to a previous receiver setting.

MEMO:

If the cone size (diameter) of the speaker is larger than 5

inches, please set to Large.

MEMO:

• You can only set the surround back speaker to large if

the surround speakers are set to small.

• If you choose none for surround speakers (see

previous setup) you won’t be able to select any

surround back speakers either.

• If you choose A+B speaker systems no sound is heard

from the “passive subwoofer”.

DTS-ES ON/OFF setting mode (VSX-

D810S/D850S only)

This setting allows you to hear surround back channels

on DTS disc regardless of whether the disc itself is a 5.1

Ch disc or a 6.1 Ch disc. Naturally you need to hook up

surround back speakers (see p. 13) and set them properly

(see below on this page) in order to hear surround back

channels. If you choose ON you will hear surround back

channels with DTS discs. If you choose OFF you will not.

Choose DTS-ES ON or OFF by using the %

or ﬁ buttons.

MEMO:

• If you choose none for the surround back speakers setting

later on this page you won’t be able to select ON here.

• You’ll only get surround back channel sound when

the receiver is in STANDARD mode (see p. 27-29),

DTS-ES is set to ON and the disc is a DTS 5.1/6.1

channel disc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-D850S Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info