Bedienungsanleitung Pioneer VSX-LX504 (Seite 7 von 203) (Englisch)

699656

Zoom out

Zoom in

Vorherige Seite

1/203

Nächste Seite

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Firmware Update Procedure

The update may take approx. 20 minutes to complete via network or via USB

port. Existing settings are guaranteed in either updating method.

When this unit is connected to the network, notications of rmware updates may

be displayed. To update the rmware, select "Update Now" with the cursors on

the remote controller, and press the ENTER button. The unit automatically enters

standby mode after "Completed!" is displayed, and the update is completed.

Disclaimer: The program and accompanying online documentation are furnished

to you for use at your own risk.

Our company will not be liable and you will have no remedy for damages for

any claim of any kind whatsoever concerning your use of the program or the

accompanying online documentation, regardless of legal theory, and whether

arising in tort or contract.

In no event will our company be liable to you or any third party for any special,

indirect, incidental, or consequential damages of any kind, including, but not

limited to, compensation, reimbursement or damages on account of the loss of

present or prospective prots, loss of data, or for any other reason whatsoever.

Updating the Firmware via Network

• While updating the rmware, do not do the following:

– Disconnecting and reconnecting cables, USB storage device, speaker

setup microphone or headphones, or performing operations on the unit

such as turning the power o

– Accessing this unit from a PC or smartphone using their applications

• Check that the unit is turned on, and the connection to the Internet is secured.

• Turn o the controller components (PC etc.) connected to the network.

• Stop any playing Internet radio, USB storage device, or server content.

• If the multi-zone function is active, turn it o.

• If "HDMI CEC" is set to "On", set it to "O".

– Press to display the Home screen. Next, select "System Setup" -

"Hardware" - "HDMI", press ENTER, select "HDMI CEC" and select "O".

* The descriptions may dier from the actual on-screen displays, however, operations

and functions are the same.

Update

1. Press .

The Home screen is displayed on the TV screen.

2. Select "System Setup" - "Miscellaneous" - "Firmware Update" - "Update via

NET" with the cursors in order, then press ENTER.

• If "Firmware Update" is grayed out and cannot be selected, wait for a while

until it starts up.

• If there is no updatable rmware, "Update via NET" cannot be selected.

3. Press ENTER with "Update" selected, and start update.

• During the update, the TV screen may go black depending on the program

to be updated. In such a case, check the progress on the display of the

unit. The TV screen will remain black until the update is completed and the

power is turned on again.

• When "Completed!" is displayed, the update is complete.

4. Press STANDBY/ON on the main unit to turn the unit into standby mode.

The process is completed, and your rmware is updated to the latest version.

• Do not use on the remote controller.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-LX504 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-LX504

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info