Bedienungsanleitung Pioneer VSX-LX504 (Seite 108 von 203) (Englisch)

699656

108

Zoom out

Zoom in

Vorherige Seite

1/203

Nächste Seite

108

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Connecting the Sonos System for Playback

Once your unit is connected to the Sonos Connect you will be able to send any

music or source on your Sonos App to the unit. By going through the Sonos

Connect, you can play your unit through other Sonos devices in the network in

the same group, or you can just play on your unit. Further, the power of your

unit turns on automatically when music starts playing on the Sonos App, and the

linked function to switch input works.

• If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is

set to "O " in the Home, manually turn the unit on and then press NET on the

remote controller. In the factory default setting, the Network Standby function

( p161) is set to On.

Necessary Equipment

• Sonos Connect

• RCA Audio Cable (Supplied with Sonos Connect)

How to Connect This Unit and Sonos

Connect

1. Connect the Sonos Connect to the AUDIO IN jack of this unit with the RCA

cable supplied with the Sonos Connect. Any input can be used other than the

PHONO input.

• You can also connect with a digital cable. For details, refer to the instruction

manual of the Sonos.

• You can rename the input that is displayed on the unit to a more logical

name. For example, you can change the name of input that the Sonos

Connect is plugged into from "CD" (or other input) to "SONOS". Press the

button on the remote controller to display the Home screen, and select

"System Setup" - "Source" - "Name Edit" to change the name.

Setting Up

A setup is required to play Sonos on this unit. Make the setting according to the

following procedure.

1. Press the button on the remote controller to display the Home screen,

select "System Setup" - "Hardware" - "Works with SONOS", and press the

ENTER button.

2. Select the following items with the cursors / and set each item.

Input Selector:

Enable the interlocking function with the Sonos Connect. With the cursors

/ , select the input selector to which the Sonos Connect is connected.

Connected Device:

Press the ENTER button to display Sonos devices connected to the same

network as the network of this unit. Select the Sonos Connect connected to

the unit and press the ENTER button.

• Products (e.g. Play:3 unequipped with an output terminal) other than the

Sonos Connect are also displayed in the device list and selectable. In

that case, when playback on the Sonos side starts, the input is switched,

however, audio is not output. Select the room name of the connected

Sonos Connect.

• Up to 32 devices can be displayed on the Sonos product list screen. If you

cannot nd the Sonos Connect to be interlocked, return to the previous

screen, turn o the product you want to interlock, and try again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-LX504 Seite 108

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-LX504

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info