Bedienungsanleitung Pioneer VSX-S500-S (Seite 8 von 56) (Englisch)

491888

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Controls and displays

Front panel

 STANDBY/ON

2 PHONES jack

Use to connect headphones. When the headphones are

connected, there is no sound output from the speakers. The

listening mode when the sound is heard from the headphone

can be selected only from PHONES SURR, STEREO or

STEREO ALC mode (S.R AIR mode can be also selected with

ADAPTER input).

3 PORTABLE/MCACC SETUP MIC jack

Use to connect an auxiliary component using a stereo mini-

jack cable (page 18) or connect a microphone when

performing Auto MCACC setup (page 19).

4 Remote sensor

Receives the signals from the remote control (see Operating

range of remote control on page 7).

5 Character display

See Display below.

6 MCACC indicator

Lights when Acoustic Calibration EQ (page 34) is on

(Acoustic Calibration EQ is automatically set to on after the

Auto MCACC setup (page 19)).

7 HDMI indicator

Blinks when connecting an HDMI-equipped component;

lights when the component is connected (page 14).

8 INPUT SELECTOR

Selects an input source (page 21).

9 iPod iPhone DIRECT CONTROL

Change the receiver’s input to the iPod and enable iPod

operations on the iPod (page 22).

10 iPod iPhone USB terminal

Use to connect your Apple iPod or USB mass storage device

as an audio source (page 17).

11 MASTER VOLUME dial

Display

12 Dolby Digital indicators

2 D – Lights when a Dolby Digital encoded signal is

detected.

2TrueHD – Lights when a source with Dolby TrueHD

encoded audio signals is detected.

2 D+ – Lights when a source with Dolby Digital Plus

encoded audio signals is detected.

EX – Lights to indicate Dolby Digital EX decoding.

PLII(x/z) – Lights to indicate 2 Pro Logic II/2 Pro Logic

IIx or 2 Pro Logic IIz decoding (see Listening in surround

sound on page 31 for more on this).

13 DTS indicators

DTS – Lights when a source with DTS encoded audio

signals is detected.

HD – Lights when a source with DTS-EXPRESS or DTS-

HD encoded audio signals is detected.

ES – Lights to indicate DTS-ES decoding.

96/24 – Lights when a source with DTS 96/24 encoded

audio signals is detected.

14 Listening mode indicators

AT – Lights when the Auto Surround feature is switched

on (page 31).

DIR – Lights when the DIRECT or PURE DIRECT mode is

switched on (page 32).

15 Audio signal indicators

D – Lights when a digital audio input is selected. Blinks

when a digital audio input is selected and selected audio

input is not provided.

HDMI – Lights when an HDMI input is selected. Blinks

when an HDMI input is selected and selected HDMI

signal is not provided.

16 iPod indicators

– Lights during repeat play.

– Lights during shuffle play.

17 Sleep timer ( ) indicator

Lights when the receiver is in sleep mode (page 6).

18 Character display

Displays various system information, the preset number of

the tuner or the input signal type, etc.

MASTER

VOLUME

AUDIO/ VIDEO MULTI-CHANNEL RECEIVER

VSX

-S500

PORTABLE

MCACC

SETUP

MICPHONES

STANDBY/ ON

MCACC

HDMI

iPod iPhone

DIRECT CONTROL

iPod iPhone

USB

5 V

INPUT SELECTOR

1 2 3 4 567810119

12 13 15 181714 14 16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-S500-S Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-S500-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info