Bedienungsanleitung Pioneer VSX-S500-S (Seite 9 von 56) (Englisch)

491888

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Connecting your equipment

Chapter 2:

Connecting your

equipment

Determining the speakers’ application

This unit permits you to build various surround systems, in

accordance with the number of speakers you have.

• Be sure to connect speakers to the front left and right

channels (L and R).

Choose one from Plans [A] to [D] below.

Important

• The Speaker System setting must be made if you use any

of the connections shown below other than [A] (see

Speaker System on page 36).

• The Pioneer S-SLW500 passive subwoofer can only be

connected using plans [A] and [B]. When connecting

speakers using Plans [C] or [D], be sure to use a model

with a built-in amp and connect to the PREOUT

SUBWOOFER terminal.

[A] 5.1 channel surround system

*Default setting

• Speaker System setting: Normal

A 5.1 ch surround system connects the left and right front

speakers (L/R), the center speaker (C), the left and right

surround speakers (SL/SR), and the subwoofer (SW).

[B] 3.1 channel surround system & Speaker B

connection

• Speaker System setting: Speaker B

With these connections you can simultaneously enjoy 3.1-

channel surround sound in the main zone with stereo

playback of the same sound on the B speakers.

• When using the B speakers, main zone sound will only be

output from the front speakers, the center speaker and

the subwoofer.

• Speaker B does not allow for subwoofer connection.

Please use full-range speakers.

[C] 4.1 channel surround system & Front Bi-amping

connection (High quality surround)

• Speaker System setting: Bi-Amp

Bi-amping connection of the front speakers for high sound

quality with 4.1-channel surround sound.

• When using the Front Bi-amping connection, sound will

only be output from the front speakers, the surround

speakers and the subwoofer.

[D] 6.1 channel surround system (Surround Back)

• Speaker System setting: SB Single

Adding a surround back (SB) speaker to Plan [A] improves

the surround-sound effect from the rear. When connecting a

subwoofer in this way, please make sure to use one with a

built-in amp.

Add surround back or front height speakers

Adding surround back speakers (SBL/SBR) or front height

speakers (FHL/FHR) to Plans [A] or [C] enables playback at

up to 7.1 ch (plan [C] allows for up to 6.1 ch only).

Important

• To connect the surround back or front height

speakers, an additional amplifier is required. Connect

the additional amplifier to the PRE OUT SURR BACK/

FRONT HEIGHT outputs of this unit and connect the

surround back or front height speakers to the additional

amplifier (see Connect the surround back or front height

speakers on page 12).

Main zone

Speaker B

Front Bi-Amp

Surround back speaker

FHL

FHR

SBL

SBR

Front height speakers

Surround back speakers

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-S500-S Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-S500-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info