Bedienungsanleitung Pioneer VSX-S500-S (Seite 20 von 56) (Englisch)

491888

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Basic Setup

Select ‘Auto MCACC’ from the Home Menu, then press

ENTER.

•“Mic In!” blinks when the microphone is not connected to

MCACC SETUP MIC jack.

Try to be as quiet as possible after pressing ENTER. The

system outputs a series of test tones to establish the ambient

noise level.

Follow the instructions on-screen.

• Make sure the microphone is connected.

• When using a powered subwoofer, make sure the

subwoofer is on and the volume is turned up.

• When using surround back or front height speakers, turn

on the power to the amplifier to which the surround back

or front height speakers are connected, and adjust the

sound level to the desired level.

• See below for notes regarding background noise and

other possible interference.

Wait for the test tones to finish.

A progress report is displayed on-screen while the receiver

outputs test tones to determine the speakers present in your

setup. Try to be as quiet as possible while it’s doing this.

• For correct speaker settings, do not adjust the volume

during the test tones.

Confirm the speaker configuration.

The configuration shown on-screen should reflect the actual

speakers you have.

• With error messages (such as Too much ambient noise)

select RETRY after checking for ambient noise (see Other

problems when using the Auto MCACC setup below).

If the speaker configuration displayed isn’t correct, use /

to select the speaker and / to change the setting. When

you’re finished, go to the next step.

If you see an error message (ERR) in the right side column,

there may be a problem with the speaker connection. If

selecting RETRY doesn’t fix the problem, turn off the power

and check the speaker connections.

Make sure ‘OK’ is selected, then press ENTER.

If the screen in step 8 is left untouched for 10 seconds and

ENTER is not pressed in step 9, the Auto MCACC setup will

start automatically as shown.

A progress report is displayed on-screen while the receiver

outputs more test tones to determine the optimum receiver

settings for channel level, speaker distance, and Acoustic

Calibration EQ.

Again, try to be as quiet as possible while this is happening.

It may take 1 to 3 minutes.

The Auto MCACC setup has finished! You return to the

Home Menu.

The settings made in the Auto MCACC setup should give you

excellent surround sound from your system, but it is also

possible to adjust these settings manually using the Manual

Speaker Setup (starting on page 36).

Note

• Depending on the characteristics of your room,

sometimes identical speakers with cone sizes of around

12 cm will end up with different size settings. You can

correct the setting manually using the Speaker Setting on

page 37.

• The subwoofer distance setting may be farther than the

actual distance from the listening position. If this is the

case, perform settings manually (see Speaker Distance on

page 38).

Other problems when using the Auto MCACC

setup

If the room environment is not optimal for the Auto MCACC

setup (too much background noise, echo off the walls,

obstacles blocking the speakers from the microphone) the

final settings may be incorrect. Check for household

appliances (air conditioner, fridge, fan, etc.), that may be

affecting the environment and switch them off if necessary. If

there are any instructions showing in the front panel display,

please follow them.

• Some older TVs may interfere with the operation of the

microphone. If this seems to be happening, switch off the

TV when doing the Auto MCACC setup.

Home Menu

1.Auto MCACC

2.Manual SP Setup

3.Pre Out Setting

4.Input Assign

5.Video Parameter

6.HDMI Setup

7.Auto Power Down

8.FL Demo Mode

1.Auto MCACC

Now Analyzing

Environment Check

Ambient Noise

Speaker YES/NO

Return

1.Auto MCACC

Check!

Return

10:Next

Front

Center

Surr

Surr. Back

Subwoofer

[ YES ]

[

---

]

[ YES ]

1.Auto MCACC

Now Analyzing

Surround Analyzing

Speaker System

Speaker Distance

Channel Level

Acoustic Cal EQ

Return

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-S500-S Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-S500-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info