Bedienungsanleitung Pioneer VSX-S500-S (Seite 25 von 56) (Englisch)

491888

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Basic playback

Use

/

to select audio file or Internet radio station,

and then press ENTER.

Use

/

to select playback or delete options and then

press ENTER.

 – Selected item will begin playing

 – Deletes selected item from Favorites folder

• Select to undo previous operation.

Network setup menu

Setting up the network to listen to Internet radio on this

receiver.

Select ‘Settings’ from the Main Menu.

Select the setting you want to adjust.

• Network – Adjust settings for the network (see Network

settings below).

• General – Use to reset all network connection settings to

their initial, factory-setting condition (see General settings

below).

Network settings

In case the router connected to the LAN terminal on this

receiver is a broadband router (with a built-in DHCP server

function), simply turn on the DHCP server function, and you

will not need to set up the network manually. You must set up

the network as described below only when you have

connected this receiver to a broadband router without a

DHCP server function. Before you set up the network, consult

with your ISP or the network manager for the required

settings. It is advised that you also refer to the operation

manual supplied with your network component.

Select ‘Network’ from the Settings menu.

Select ‘Modes’ from the Network Settings menu.

In case you make changes to the network configuration

without the DHCP server function, make the corresponding

changes to the network settings of this receiver.

• DHCP (default setting) – Select if the server is DHCP

compatible.

When DHCP is selected, connection will begin

automatically. Connection is complete when network

connection details are displayed. Press ENTER to return

to the previous screen.

• STATIC – To connect to the server manually, follow the

instructions listed below.

Press  to delete the immediately preceding character.

Press  to switch between character types.

Press / to choose the desired character from those

displayed and press ENTER.

Once input is complete, or if you wish to cancel the

input operation, press  until OK/CANCEL is

displayed, then use / to choose either OK or

CANCEL and press ENTER.

Note

•If STATIC is selected, the settings will be as follows.

IP (IP address)

The IP address to be entered must be defined within the

following ranges. If the IP address defined is beyond the

following ranges, you cannot play back audio files

stored on components on the network or listen to

Internet radio stations.

Class A: 10.0.0.1 to 10.255.255.254

Class B: 172.16.0.1 to 172.31.255.254

Class C: 192.168.0.1 to 192.168.255.254

MASK (Subnet Mask)

In case an xDSL modem or a terminal adapter is directly

connected to this receiver, enter the subnet mask

provided by your ISP on paper. In most cases, enter

255.255.255.0.

Gateway (Default Gateway)

In case a gateway (router) is connected to this receiver,

enter the corresponding IP address.

DNS (DNS server)

Enter the DNS server address you received in writing

from your internet service provider.

• Select Status from the Network Settings menu to show

your current network connection mode and details.

General settings

Select ‘General’ from the Settings menu.

Select the item you want to set up from the General

Settings menu.

• Factory Settings – Use to reset all network connection

settings to their initial, factory-setting condition.

When “Warning: All Settings will be lost! Are you

sure?” is displayed, select  and press ENTER. While

the settings are being reset, the screen will display a

“Please Wait” message. Resetting is complete once the

screen returns to the Main Menu.

To quit the resetting, select .

• About – Displays the MAC address of this receiver.

Main Menu

Now Playing

Favorites Settings

Internet

Radio

Music

Library

Settings

1 of

Network

General

Settings

1 of

Network

General

Network Settings

1 of

Modes

Status

Network Modes

1 of

DHCP

STATIC

Settings

1 of

Network

General

General Settings

1 of

Factory Settings

About

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-S500-S Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-S500-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info