Bedienungsanleitung Pioneer VSX-S500-S (Seite 40 von 56) (Englisch)

491888

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

The Home Menu

Resolution

Specifies the output resolution of the video signal (when

video input signals are output at the HDMI OUT terminal,

select this according to the resolution of your monitor and

the images you wish to watch).

Select ‘Video Parameter’ from the Home Menu.

Select ‘Resolution’ from the Video Parameter menu.

Select output resolution.

• AUTO – The resolution is selected automatically

according to the capacity of the TV (monitor) connected

by HDMI.

• PURE – The signals are output with the same resolution

as when input.

• 480p/720p/1080i/1080p – The signal is output with the

resolution specified here (480p means the resolution of

480p/576p).

When you’re finished, press RETURN.

You return to the Video Parameter menu.

Note

• When set to a resolution with which the TV (monitor) is

not compatible, no picture is output. Also, in some cases

no picture will be output due to copyright protection

signals. In this case, change the setting.

Aspect

Specifies the aspect ratio when analog video input signals

are output at the HDMI OUT terminal. Make your desired

settings while checking each setting on your display (if the

image doesn’t match your monitor type, cropping or black

bands appear).

Select ‘Video Parameter’ from the Home Menu.

Select ‘Aspect’ from the Video Parameter menu.

Select desired output aspect ratio.

• THROUGH – The input video signal is output unchanged.

• NORMAL – Black bands will appear either at top and

bottom or on both sides.

When you’re finished, press RETURN.

You return to the Video Parameter menu.

Note

• If the image doesn’t match your monitor type, adjust the

aspect ratio on the source component or on the monitor.

• ANALOG refers to the composite video input terminal.

Depending on the Input Assign menu setting, the input

will be allocated to either ANALOG AUX, DIGITAL AUX,

or CD.

The Auto Power Down menu

Set to automatically turn off the receiver after a specified time

has passed (when the power has been on with no operation

for several hours).

• Default setting: 6H

Select ‘Auto Power Down’ from the Home Menu.

Specify the amount of time to allow before the power

is turned off (when there has been no operation).

• You can select 2, 4 or 6 hours, or OFF (if no automatic

shutoff is desired).

When you’re finished, press RETURN.

You return to the Home Menu.

The FL Demo Mode menu

Set whether or not various demos are to be shown on the

front panel display.

Select ‘FL Demo Mode’ from the Home Menu.

Choose ON or OFF for the demo display.

When you’re finished, press RETURN.

You return to the Home Menu.

5.Video Parameter

Return

a.Video Converter

b.Resolution

c.Aspect

5b.Resolution

Resolution

Return

AUTO

5.Video Parameter

Return

a.Video Converter

b.Resolution

c.Aspect

5c.Aspect

BD/BDR

DVD/DVR

GAME

STB

ANALOG

Return

[THROUGH]

[NORMAL

]

[NORMAL

]

NORMAL

Home Menu

1 . Auto MCACC

2 . Manual SP Setup

3 . Pre Out Setting

4 . Input Assign

5.Video Parameter

6.HDMI Setup

7.Auto Power Down

8.FL Demo Mode

7.Auto Power Down

Return

Home Menu

1 . Auto MCACC

2 . Manual SP Setup

3 . Pre Out Setting

4 . Input Assign

5.Video Parameter

6.HDMI Setup

7.Auto Power Down

8.FL Demo Mode

Return

FL Demo ON

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-S500-S Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-S500-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info